1EPS Mecánica Aplicada-MAPLI

2021

1. A Novel Methodology for the Characterization of Cutting Conditions in Turning Processes Using Machine Learning Models and Acoustic Emission Signals

   16th International Conference on Soft Computing Models in Industrial and Environmental Applications (SOCO 2021)

2. A coupled 3D wear and fatigue numerical procedure: Application to fretting problems in ultra-high strength steel wires

   International Journal of Fatigue, Vol. 143

3. A novel machine learning‐based methodology for tool wear prediction using acoustic emission signals

   Sensors, Vol. 21, Núm. 17

4. A novel methodology to characterize tool-chip contact in metal cutting using partially restricted contact length tools

   CIRP Annals, Vol. 70, Núm. 1, pp. 61-64

5. An analytical approach to calculate stress concentration factors of machined surfaces

   International Journal of Mechanical Sciences, Vol. 190

6. Analytical model to calculate radial forces in permanent‐magnet synchronous machines

   Applied Sciences (Switzerland), Vol. 11, Núm. 22

7. Bactericidal surfaces: An emerging 21st-century ultra-precision manufacturing and materials puzzle

   Applied Physics Reviews, Vol. 8, Núm. 2

8. Ball-on-flat linear reciprocating tests: Critical assessment of wear volume determination methods and suggested improvements for ASTM D7755 standard

   Wear, Vol. 470-471

9. Comparative study of finishing techniques for age-hardened Inconel 718 alloy

   Journal of Materials Research and Technology, Vol. 15, pp. 5623-5634

10. Experimental and FEM analysis of dry and cryogenic turning of hardened steel 100Cr6 using CBN Wiper tools

    Procedia CIRP

11. Experimental evaluation and surface integrity analysis of cryogenic coolants approaches in the cylindrical plunge grinding

    Scientific Reports, Vol. 11, Núm. 1

12. Generación virtual de la geometría 3D de acoplamientos dentados abombados

    XXIII Congreso Nacional de Ingeniería Mecánica

13. Generación virtual de la geometría 3D de acoplamientos dentados abombados

    XXIII Congreso Nacional de Ingeniería Mecánica: Libro de Resúmenes

14. Impregnation quality diagnosis in Resin Transfer Moulding by machine learning

    Composites Part B: Engineering, Vol. 221

15. Integral Design and Manufacturing Methodology of a Reduced-Scale Servo Press

    IEEE/ASME Transactions on Mechatronics, Vol. 26, Núm. 5, pp. 2418-2428

16. Numerical Analysis of the Wind Turbine Pitch Bearing Raceway Tribo-contact due to Cyclic Loading Under Constant Pitch Angle

    Lecture Notes in Mechanical Engineering

17. Optimum slot and pole design for vibration reduction in permanent magnet synchronous motors

    Applied Sciences (Switzerland), Vol. 11, Núm. 11

18. Quasi-static and dynamic crush behaviour of 3D printed thin-walled profiles reinforced with continuous carbon and glass fibres

    Composites Part B: Engineering, Vol. 217

19. Quasi-static transmission error behavior under the composite effect of temperature and load

    Gear Technology, pp. 34-44

20. The effect of cross-section geometry on crushing behaviour of 3D printed continuous carbon fibre reinforced polyamide profiles

    Composite Structures, Vol. 274