Publicacións nas que colabora con Jon Aurrekoetxea Narbarte (45)
2024
-
Definition of 3D Printing Parameters by the Design of Experiments to Characterise Carbon Fibre-Reinforced Polyamide
Proceedings of the 17th International Conference on Industrial Engineering and Industrial Management (ICIEIM) – XXVII Congreso de Ingeniería de Organización (CIO2023), pp. 1-6
-
Impact behaviour of bio-inspired sandwich panels integrally manufactured from 3D printed continuous carbon fibre reinforced polyamide
Composites Science and Technology, Vol. 250
-
Low-velocity impact performance of integrally-3D printed continuous carbon fibre composite sandwich panels
Materials Letters, Vol. 354
2023
-
Design, manufacturing and testing of 3D printed variable-stiffness laminates for improved open-hole tensile behaviour
Additive Manufacturing, Vol. 63
-
Predicting the effect of voids generated during RTM on the low-velocity impact behaviour by machine learning-based surrogate models
Composites Part B: Engineering, Vol. 260
2022
-
Efecto de la separación fibra-matriz sobre las propiedades mecánicas de una viga forjada en poliamida reforzada con fibra de vidrio = Effect of the fiber-matrix separation on the mechanical properties of a fiberglass reinforced polyamide forged beam
Revista de Materiales Compuestos; Comunicaciones Matcomp21- Sostenibilidad y reciclaje - Fabricación, Vol. 7, Núm. 1, pp. 1-5
-
Effect of voids on the impact properties of Non-Crimp fabric carbon/epoxy laminates manufactured by liquid composite Moulding
Composite Structures, Vol. 297
-
Optimization of the CRTM process by means of monitoring techniques
Revista de Materiales Compuestos
2021
-
Impregnation quality diagnosis in Resin Transfer Moulding by machine learning
Composites Part B: Engineering, Vol. 221
-
Quasi-static and dynamic crush behaviour of 3D printed thin-walled profiles reinforced with continuous carbon and glass fibres
Composites Part B: Engineering, Vol. 217
-
The effect of cross-section geometry on crushing behaviour of 3D printed continuous carbon fibre reinforced polyamide profiles
Composite Structures, Vol. 274
2020
-
Analysis of axial crushing behaviour of unsaturated polyester and vinyl ester composites manufactured by out of die ultraviolet cured pultrusion
ECCM 2018 - 18th European Conference on Composite Materials
-
Characterization of elastic and resistance behaviours of 3D printed continuous carbon fibre reinforced thermoplastics
ECCM 2018 - 18th European Conference on Composite Materials
-
Sensitivity to race-tracking of compression resin transfer moulding
ECCM 2018 - 18th European Conference on Composite Materials
2019
-
Design and characterisation of cellular composite structures for automotive crash-boxes manufactured by out of die ultraviolet cured pultrusion
Composites Part B: Engineering, Vol. 160, pp. 217-224
-
Enhanced energy absorption properties in 3D printed polymer matrix composite
ECCM 2018 - 18th European Conference on Composite Materials
-
Over-3D printing of continuous carbon fibre composites on organo-sheet substrates
AIP Conference Proceedings
2018
-
Effect of the manufacturing process on the energy absorption capability of GFRP crush structures
Composite Structures, Vol. 187, pp. 316-324
-
Simulation and experimental validation of the effect of material and processing parameters on the injection stage of compression resin transfer molding
Polymer Composites, Vol. 39, Núm. 12, pp. 4333-4340
2016
-
Characterisation of ultraviolet curing resins for 3D pultrusion
ECCM 2016 - Proceeding of the 17th European Conference on Composite Materials