Publicaciones en colaboración con investigadores/as de Universitat Politècnica de Catalunya (17)

2023

  1. Fault diagnosis of floating offshore wind farms, a benchmark case study

    IFAC-PapersOnLine

2020

  1. CFD simulation of a novel anaerobic-anoxic reactor for biological nutrient removal: Model construction, validation and hydrodynamic analysis based on OpenFOAM®

    Chemical Engineering Science, Vol. 215

  2. Hydrodynamic optimization of multi-environment reactors for biological nutrient removal: A methodology combining computational fluid dynamics and dimensionless indexes

    Chemical Engineering Science, Vol. 224

2016

  1. Environmental Impact of Public Charging Facilities for Electric Two-Wheelers

    Journal of Industrial Ecology, Vol. 20, Núm. 1, pp. 54-66

2015

  1. Development of urban solar infrastructure to support low-carbon mobility

    Energy Policy, Vol. 85, pp. 102-114

  2. Life Cycle Management Applied to Urban Fabric Planning

    LIFE CYCLE MANAGEMENT (SPRINGER), pp. 307-317

2014

  1. Characterisation and modelling of prestrained viscoelastic films

    International Journal of Adhesion and Adhesives, Vol. 50, pp. 183-190

  2. Environmental management of granite slab production from an industrial ecology standpoint

    Journal of Cleaner Production, Vol. 84, Núm. 1, pp. 619-628

  3. Life cycle inventory analysis of granite production from cradle to gate

    International Journal of Life Cycle Assessment, Vol. 19, Núm. 1, pp. 153-165

2013

  1. Experimental characterization and modelling of large-strain viscoelastic behavior of a thermoplastic polyurethane elastomer

    Rubber Chemistry and Technology, Vol. 86, Núm. 1, pp. 146-164

2012

  1. Life cycle assessment of granite application in sidewalks

    International Journal of Life Cycle Assessment, Vol. 17, Núm. 5, pp. 580-592

  2. Planning strategies for promoting environmentally suitable pedestrian pavements in cities

    Transportation Research Part D: Transport and Environment, Vol. 17, Núm. 6, pp. 442-450

2008

  1. Characterization of recycling induced degradation based on fracture mechanics approach

    Recycling: New Research (Nova Science Publishers, Inc.), pp. 89-124

2005

  1. Characterisation of the impact behaviour of polymer thermoplastics

    Polymer Testing, Vol. 24, Núm. 2, pp. 145-151

2003

  1. Effects of injection moulding induced morphology on the fracture behaviour of virgin and recycled polypropylene

    Polymer, Vol. 44, Núm. 22, pp. 6959-6964

2001

  1. Effects of recycling on the microstructure and the mechanical properties of isotactic polypropylene

    Journal of Materials Science, Vol. 36, Núm. 11, pp. 2607-2613

  2. Fracture behaviour of virgin and recycled isotactic polypropylene

    Journal of Materials Science, Vol. 36, Núm. 21, pp. 5073-5078