1GEP Portaera mekanikoa eta produktuaren diseinua
Ikerketa eremua
Universitat Politècnica de Catalunya
Barcelona, EspañaUniversitat Politècnica de Catalunya-ko ikertzaileekin lankidetzan egindako argitalpenak (17)
2023
-
Fault diagnosis of floating offshore wind farms, a benchmark case study
IFAC-PapersOnLine
2020
-
CFD simulation of a novel anaerobic-anoxic reactor for biological nutrient removal: Model construction, validation and hydrodynamic analysis based on OpenFOAM®
Chemical Engineering Science, Vol. 215
-
Hydrodynamic optimization of multi-environment reactors for biological nutrient removal: A methodology combining computational fluid dynamics and dimensionless indexes
Chemical Engineering Science, Vol. 224
2016
-
Environmental Impact of Public Charging Facilities for Electric Two-Wheelers
Journal of Industrial Ecology, Vol. 20, Núm. 1, pp. 54-66
2015
-
Development of urban solar infrastructure to support low-carbon mobility
Energy Policy, Vol. 85, pp. 102-114
-
Life Cycle Management Applied to Urban Fabric Planning
LIFE CYCLE MANAGEMENT (SPRINGER), pp. 307-317
2014
-
Characterisation and modelling of prestrained viscoelastic films
International Journal of Adhesion and Adhesives, Vol. 50, pp. 183-190
-
Environmental management of granite slab production from an industrial ecology standpoint
Journal of Cleaner Production, Vol. 84, Núm. 1, pp. 619-628
-
Life cycle inventory analysis of granite production from cradle to gate
International Journal of Life Cycle Assessment, Vol. 19, Núm. 1, pp. 153-165
2013
-
Experimental characterization and modelling of large-strain viscoelastic behavior of a thermoplastic polyurethane elastomer
Rubber Chemistry and Technology, Vol. 86, Núm. 1, pp. 146-164
2012
-
Life cycle assessment of granite application in sidewalks
International Journal of Life Cycle Assessment, Vol. 17, Núm. 5, pp. 580-592
-
Planning strategies for promoting environmentally suitable pedestrian pavements in cities
Transportation Research Part D: Transport and Environment, Vol. 17, Núm. 6, pp. 442-450
2008
-
Characterization of recycling induced degradation based on fracture mechanics approach
Recycling: New Research (Nova Science Publishers, Inc.), pp. 89-124
2005
-
Characterisation of the impact behaviour of polymer thermoplastics
Polymer Testing, Vol. 24, Núm. 2, pp. 145-151
2003
-
Effects of injection moulding induced morphology on the fracture behaviour of virgin and recycled polypropylene
Polymer, Vol. 44, Núm. 22, pp. 6959-6964
2001
-
Effects of recycling on the microstructure and the mechanical properties of isotactic polypropylene
Journal of Materials Science, Vol. 36, Núm. 11, pp. 2607-2613
-
Fracture behaviour of virgin and recycled isotactic polypropylene
Journal of Materials Science, Vol. 36, Núm. 21, pp. 5073-5078