Financiador: Gobierno Vasco
date_range Duración do 01 de xaneiro de 2016 ao 31 de decembro de 2021 (72 meses) Rematou
euro 204.000,00 EUR

De ámbito Autonómico. Con carácter Público. Outorgouse en réxime de Concorrencia competitiva.

Convocatoria: Ikertalde (Gobierno Vasco)

Investigadores/as

Foto de Jon
Jon
Aurrekoetxea Narbarte
Foto de Unai
Unai
Morales Diez

Publicacións relacionadas co proxecto (15)

Mostrar por tipoloxía

2024

  1. Impact and notched strength of multiaxially reinforced out of die UV cured pultruded profiles

    Polymer Composites

  2. Impact behaviour of bio-inspired sandwich panels integrally manufactured from 3D printed continuous carbon fibre reinforced polyamide

    Composites Science and Technology

2022

  1. Impact performance of out of die UV cured pultruded profiles for vessel structures

    ECCM 2022 - Proceedings of the 20th European Conference on Composite Materials: Composites Meet Sustainability

  2. Optimization of the CRTM process by means of monitoring techniques

    Revista de Materiales Compuestos

2021

  1. The effect of cross-section geometry on crushing behaviour of 3D printed continuous carbon fibre reinforced polyamide profiles

    Composite Structures

  2. Impregnation quality diagnosis in Resin Transfer Moulding by machine learning

    Composites Part B: Engineering

  3. Quasi-static and dynamic crush behaviour of 3D printed thin-walled profiles reinforced with continuous carbon and glass fibres

    Composites Part B: Engineering

2020

  1. Analysis of axial crushing behaviour of unsaturated polyester and vinyl ester composites manufactured by out of die ultraviolet cured pultrusion

    ECCM 2018 - 18th European Conference on Composite Materials

  2. Effect of alumina tri-hydrate filler on the mechanical and optical properties of flame-retardant ultraviolet cured vinyl ester composites

    ECCM 2018 - 18th European Conference on Composite Materials

  3. An analytical model of through-thickness photopolymerisation of composites: Ultraviolet light transmission and curing kinetics

    Composites Part B: Engineering

2019

  1. Enhanced energy absorption properties in 3D printed polymer matrix composite

    ECCM 2018 - 18th European Conference on Composite Materials

  2. Design and characterisation of cellular composite structures for automotive crash-boxes manufactured by out of die ultraviolet cured pultrusion

    Composites Part B: Engineering

  3. Monitoring the evolution of stiffness during ultraviolet curing of a vinyl ester resin with quasi-normal air-coupled ultrasonic spectroscopy

    Polymer Testing

2018

  1. Effect of the manufacturing process on the energy absorption capability of GFRP crush structures

    Composite Structures

  2. Effect of ultraviolet curing kinetics on the mechanical properties of out of die pultruded vinyl ester composites

    Composites Part A: Applied Science and Manufacturing