Publicaciones (53) Publicaciones de Mª Asuncion Sarrionandia Ariznabarreta

2024

  1. Impact and notched strength of multiaxially reinforced out of die UV cured pultruded profiles

    Polymer Composites, Vol. 45, Núm. 5, pp. 4348-4358

2023

  1. Paneles fabricados mediante curado UV de prepregs fuera de autoclave reforzados con perfiles de pultrusión UV

    Comunicaciones Congreso Nacional de Materiales Compuestos (MATCOMP21 y MATCOMP23). Sevilla, 21-23 Junio, 2022

2022

  1. Impact performance of out of die UV cured pultruded profiles for vessel structures

    ECCM 2022 - Proceedings of the 20th European Conference on Composite Materials: Composites Meet Sustainability

  2. Optimization of the CRTM process by means of monitoring techniques

    Revista de Materiales Compuestos

2020

  1. An analytical model of through-thickness photopolymerisation of composites: Ultraviolet light transmission and curing kinetics

    Composites Part B: Engineering, Vol. 191

  2. Analysis of axial crushing behaviour of unsaturated polyester and vinyl ester composites manufactured by out of die ultraviolet cured pultrusion

    ECCM 2018 - 18th European Conference on Composite Materials

  3. Effect of alumina tri-hydrate filler on the mechanical and optical properties of flame-retardant ultraviolet cured vinyl ester composites

    ECCM 2018 - 18th European Conference on Composite Materials

2019

  1. Design and characterisation of cellular composite structures for automotive crash-boxes manufactured by out of die ultraviolet cured pultrusion

    Composites Part B: Engineering, Vol. 160, pp. 217-224

2018

  1. Effect of ultraviolet curing kinetics on the mechanical properties of out of die pultruded vinyl ester composites

    Composites Part A: Applied Science and Manufacturing, Vol. 109, pp. 280-289

2016

  1. Characterisation of ultraviolet curing resins for 3D pultrusion

    ECCM 2016 - Proceeding of the 17th European Conference on Composite Materials

  2. Impact behaviour of glass fibre-reinforced epoxy/aluminium fibre metal laminate manufactured by Vacuum Assisted Resin Transfer Moulding

    Composite Structures, Vol. 140, pp. 118-124

  3. Out of die ultraviolet pultrusion process set-up: Limitations of photo-differential scanning calorimetry analysis

    ECCM 2016 - Proceeding of the 17th European Conference on Composite Materials

  4. The effect of process parameters on ultraviolet cured out of die bent pultrusion process

    Composites Part B: Engineering, Vol. 89, pp. 9-17

2015

  1. Out of die ultraviolet cured pultrusion for automotive crash structures

    Composites Part B: Engineering, Vol. 79, pp. 209-216

2014

  1. Effects of vacuum infusion processing parameters on the impact behavior of carbon fiber reinforced cyclic butylene terephthalate composites

    Journal of Composite Materials, Vol. 48, Núm. 3, pp. 333-344

  2. Electrospinning of poly(lactic acid)/polyhedral oligomeric silsesquioxane nanocomposites and their potential in chondrogenic tissue regeneration

    Journal of Biomaterials Science, Polymer Edition, Vol. 25, Núm. 8, pp. 802-825

  3. Impact behaviour of basalt fibre reinforced furan composites cured under microwave and thermal conditions

    Composites Part B: Engineering, Vol. 66, pp. 156-161

  4. Inpregnazio azkarreko RTM-a automozio sektorerako

    II Materialen Zientzia eta Teknologia Kongresua

  5. Karbono-zuntzez osatutako preforma baten konpresioaren karakterizazio esperimentala

    II Materialen Zientzia eta Teknologia Kongresua

  6. Manufacturing cost comparison of RTM, HP-RTM and CRTM for an automotive roof

    16th European Conference on Composite Materials, ECCM 2014