Jon Aurrekoetxea Narbarte-rekin lankidetzan egindako argitalpenak (11)
2023
-
Predicting the effect of voids generated during RTM on the low-velocity impact behaviour by machine learning-based surrogate models
Composites Part B: Engineering, Vol. 260
2022
-
Efecto de la separación fibra-matriz sobre las propiedades mecánicas de una viga forjada en poliamida reforzada con fibra de vidrio = Effect of the fiber-matrix separation on the mechanical properties of a fiberglass reinforced polyamide forged beam
Revista de Materiales Compuestos; Comunicaciones Matcomp21- Sostenibilidad y reciclaje - Fabricación, Vol. 7, Núm. 1, pp. 1-5
-
Effect of voids on the impact properties of Non-Crimp fabric carbon/epoxy laminates manufactured by liquid composite Moulding
Composite Structures, Vol. 297
-
Optimization of the CRTM process by means of monitoring techniques
Revista de Materiales Compuestos
2021
-
Impregnation quality diagnosis in Resin Transfer Moulding by machine learning
Composites Part B: Engineering, Vol. 221
2020
-
Sensitivity to race-tracking of compression resin transfer moulding
ECCM 2018 - 18th European Conference on Composite Materials
2018
-
Simulation and experimental validation of the effect of material and processing parameters on the injection stage of compression resin transfer molding
Polymer Composites, Vol. 39, Núm. 12, pp. 4333-4340
2016
-
The compression behaviour of non-crimp fabrics composites for automotive applications
ECCM 2016 - Proceeding of the 17th European Conference on Composite Materials
2014
-
Inpregnazio azkarreko RTM-a automozio sektorerako
II Materialen Zientzia eta Teknologia Kongresua
-
Karbono-zuntzez osatutako preforma baten konpresioaren karakterizazio esperimentala
II Materialen Zientzia eta Teknologia Kongresua
-
Manufacturing cost comparison of RTM, HP-RTM and CRTM for an automotive roof
16th European Conference on Composite Materials, ECCM 2014