Publications (109) Jon Aurrekoetxea Narbarte publications

2024

  1. Definition of 3D Printing Parameters by the Design of Experiments to Characterise Carbon Fibre-Reinforced Polyamide

    Proceedings of the 17th International Conference on Industrial Engineering and Industrial Management (ICIEIM) – XXVII Congreso de Ingeniería de Organización (CIO2023), pp. 1-6

  2. Impact and notched strength of multiaxially reinforced out of die UV cured pultruded profiles

    Polymer Composites, Vol. 45, Núm. 5, pp. 4348-4358

  3. Impact behaviour of bio-inspired sandwich panels integrally manufactured from 3D printed continuous carbon fibre reinforced polyamide

    Composites Science and Technology, Vol. 250

  4. Low-velocity impact performance of integrally-3D printed continuous carbon fibre composite sandwich panels

    Materials Letters, Vol. 354

2023

  1. Design, manufacturing and testing of 3D printed variable-stiffness laminates for improved open-hole tensile behaviour

    Additive Manufacturing, Vol. 63

  2. Paneles fabricados mediante curado UV de prepregs fuera de autoclave reforzados con perfiles de pultrusión UV

    Comunicaciones Congreso Nacional de Materiales Compuestos (MATCOMP21 y MATCOMP23). Sevilla, 21-23 Junio, 2022

  3. Predicting the effect of voids generated during RTM on the low-velocity impact behaviour by machine learning-based surrogate models

    Composites Part B: Engineering, Vol. 260

2022

  1. Efecto de la separación fibra-matriz sobre las propiedades mecánicas de una viga forjada en poliamida reforzada con fibra de vidrio = Effect of the fiber-matrix separation on the mechanical properties of a fiberglass reinforced polyamide forged beam

    Revista de Materiales Compuestos; Comunicaciones Matcomp21- Sostenibilidad y reciclaje - Fabricación, Vol. 7, Núm. 1, pp. 1-5

  2. Effect of voids on the impact properties of Non-Crimp fabric carbon/epoxy laminates manufactured by liquid composite Moulding

    Composite Structures, Vol. 297

  3. Fibre–Wood Laminate Biocomposites: Seawater Immersion Effects on Flexural and Low Energy Impact Properties

    Polymers, Vol. 14, Núm. 19

  4. Impact performance of out of die UV cured pultruded profiles for vessel structures

    ECCM 2022 - Proceedings of the 20th European Conference on Composite Materials: Composites Meet Sustainability

  5. Optimization of the CRTM process by means of monitoring techniques

    Revista de Materiales Compuestos

2021

  1. Generative design of 3D printed grippers for robot/human collaborative environments

    2021 IEEE International Workshop of Electronics, Control, Measurement, Signals and their Application to Mechatronics, ECMSM 2021

  2. Impregnation quality diagnosis in Resin Transfer Moulding by machine learning

    Composites Part B: Engineering, Vol. 221

  3. Quasi-static and dynamic crush behaviour of 3D printed thin-walled profiles reinforced with continuous carbon and glass fibres

    Composites Part B: Engineering, Vol. 217

  4. The effect of cross-section geometry on crushing behaviour of 3D printed continuous carbon fibre reinforced polyamide profiles

    Composite Structures, Vol. 274

2020

  1. An analytical model of through-thickness photopolymerisation of composites: Ultraviolet light transmission and curing kinetics

    Composites Part B: Engineering, Vol. 191

  2. Analysis of axial crushing behaviour of unsaturated polyester and vinyl ester composites manufactured by out of die ultraviolet cured pultrusion

    ECCM 2018 - 18th European Conference on Composite Materials

  3. Characterization of elastic and resistance behaviours of 3D printed continuous carbon fibre reinforced thermoplastics

    ECCM 2018 - 18th European Conference on Composite Materials

  4. Effect of alumina tri-hydrate filler on the mechanical and optical properties of flame-retardant ultraviolet cured vinyl ester composites

    ECCM 2018 - 18th European Conference on Composite Materials