Publications by the researcher in collaboration with Laurentzi Aretxabaleta Ramos (33)

2023

  1. Design, manufacturing and testing of 3D printed variable-stiffness laminates for improved open-hole tensile behaviour

    Additive Manufacturing, Vol. 63

  2. Predicting the effect of voids generated during RTM on the low-velocity impact behaviour by machine learning-based surrogate models

    Composites Part B: Engineering, Vol. 260

2022

  1. Efecto de la separación fibra-matriz sobre las propiedades mecánicas de una viga forjada en poliamida reforzada con fibra de vidrio = Effect of the fiber-matrix separation on the mechanical properties of a fiberglass reinforced polyamide forged beam

    Revista de Materiales Compuestos; Comunicaciones Matcomp21- Sostenibilidad y reciclaje - Fabricación, Vol. 7, Núm. 1, pp. 1-5

  2. Effect of voids on the impact properties of Non-Crimp fabric carbon/epoxy laminates manufactured by liquid composite Moulding

    Composite Structures, Vol. 297

  3. Optimization of the CRTM process by means of monitoring techniques

    Revista de Materiales Compuestos

2021

  1. Impregnation quality diagnosis in Resin Transfer Moulding by machine learning

    Composites Part B: Engineering, Vol. 221

  2. Quasi-static and dynamic crush behaviour of 3D printed thin-walled profiles reinforced with continuous carbon and glass fibres

    Composites Part B: Engineering, Vol. 217

  3. The effect of cross-section geometry on crushing behaviour of 3D printed continuous carbon fibre reinforced polyamide profiles

    Composite Structures, Vol. 274

2020

  1. Characterization of elastic and resistance behaviours of 3D printed continuous carbon fibre reinforced thermoplastics

    ECCM 2018 - 18th European Conference on Composite Materials

  2. Sensitivity to race-tracking of compression resin transfer moulding

    ECCM 2018 - 18th European Conference on Composite Materials

2019

  1. Enhanced energy absorption properties in 3D printed polymer matrix composite

    ECCM 2018 - 18th European Conference on Composite Materials

  2. Over-3D printing of continuous carbon fibre composites on organo-sheet substrates

    AIP Conference Proceedings

2018

  1. Simulation and experimental validation of the effect of material and processing parameters on the injection stage of compression resin transfer molding

    Polymer Composites, Vol. 39, Núm. 12, pp. 4333-4340

2016

  1. Dynamic 4 ENF test for a strain rate dependent mode II interlaminar fracture toughness characterization of unidirectional carbon fibre epoxy composites

    Polymer Testing, Vol. 55, pp. 212-218

  2. Impact behaviour of glass fibre-reinforced epoxy/aluminium fibre metal laminate manufactured by Vacuum Assisted Resin Transfer Moulding

    Composite Structures, Vol. 140, pp. 118-124

  3. Rate-dependent phenomenological model for self-reinforced polymers

    Composites Part A: Applied Science and Manufacturing, Vol. 84, pp. 96-102

  4. Repeated low energy impact behaviour of self-reinforced polypropylene fibre metal laminates

    ECCM 2016 - Proceeding of the 17th European Conference on Composite Materials

  5. The compression behaviour of non-crimp fabrics composites for automotive applications

    ECCM 2016 - Proceeding of the 17th European Conference on Composite Materials

2015

  1. Loading rate dependency on mode I interlaminar fracture toughness of unidirectional and woven carbon fibre epoxy composites

    Composite Structures, Vol. 121, pp. 75-82

  2. Quasi-static crush energy absorption capability of E-glass/polyester and hybrid E-glass-basalt/polyester composite structures

    Materials and Design, Vol. 76, pp. 18-25