Publications by the researcher in collaboration with Mª Asuncion Sarrionandia Ariznabarreta (50)
2024
-
Impact and notched strength of multiaxially reinforced out of die UV cured pultruded profiles
Polymer Composites, Vol. 45, Núm. 5, pp. 4348-4358
2023
-
Paneles fabricados mediante curado UV de prepregs fuera de autoclave reforzados con perfiles de pultrusión UV
Comunicaciones Congreso Nacional de Materiales Compuestos (MATCOMP21 y MATCOMP23). Sevilla, 21-23 Junio, 2022
2022
-
Impact performance of out of die UV cured pultruded profiles for vessel structures
ECCM 2022 - Proceedings of the 20th European Conference on Composite Materials: Composites Meet Sustainability
-
Optimization of the CRTM process by means of monitoring techniques
Revista de Materiales Compuestos
2020
-
An analytical model of through-thickness photopolymerisation of composites: Ultraviolet light transmission and curing kinetics
Composites Part B: Engineering, Vol. 191
-
Analysis of axial crushing behaviour of unsaturated polyester and vinyl ester composites manufactured by out of die ultraviolet cured pultrusion
ECCM 2018 - 18th European Conference on Composite Materials
-
Effect of alumina tri-hydrate filler on the mechanical and optical properties of flame-retardant ultraviolet cured vinyl ester composites
ECCM 2018 - 18th European Conference on Composite Materials
2019
-
Design and characterisation of cellular composite structures for automotive crash-boxes manufactured by out of die ultraviolet cured pultrusion
Composites Part B: Engineering, Vol. 160, pp. 217-224
2018
-
Effect of ultraviolet curing kinetics on the mechanical properties of out of die pultruded vinyl ester composites
Composites Part A: Applied Science and Manufacturing, Vol. 109, pp. 280-289
2016
-
Characterisation of ultraviolet curing resins for 3D pultrusion
ECCM 2016 - Proceeding of the 17th European Conference on Composite Materials
-
Impact behaviour of glass fibre-reinforced epoxy/aluminium fibre metal laminate manufactured by Vacuum Assisted Resin Transfer Moulding
Composite Structures, Vol. 140, pp. 118-124
-
Out of die ultraviolet pultrusion process set-up: Limitations of photo-differential scanning calorimetry analysis
ECCM 2016 - Proceeding of the 17th European Conference on Composite Materials
-
The effect of process parameters on ultraviolet cured out of die bent pultrusion process
Composites Part B: Engineering, Vol. 89, pp. 9-17
2015
-
Out of die ultraviolet cured pultrusion for automotive crash structures
Composites Part B: Engineering, Vol. 79, pp. 209-216
2014
-
Effects of vacuum infusion processing parameters on the impact behavior of carbon fiber reinforced cyclic butylene terephthalate composites
Journal of Composite Materials, Vol. 48, Núm. 3, pp. 333-344
-
Electrospinning of poly(lactic acid)/polyhedral oligomeric silsesquioxane nanocomposites and their potential in chondrogenic tissue regeneration
Journal of Biomaterials Science, Polymer Edition, Vol. 25, Núm. 8, pp. 802-825
-
Impact behaviour of basalt fibre reinforced furan composites cured under microwave and thermal conditions
Composites Part B: Engineering, Vol. 66, pp. 156-161
-
Inpregnazio azkarreko RTM-a automozio sektorerako
II Materialen Zientzia eta Teknologia Kongresua
-
Karbono-zuntzez osatutako preforma baten konpresioaren karakterizazio esperimentala
II Materialen Zientzia eta Teknologia Kongresua
-
Manufacturing cost comparison of RTM, HP-RTM and CRTM for an automotive roof
16th European Conference on Composite Materials, ECCM 2014