Publications by the researcher in collaboration with Jon Aurrekoetxea Narbarte (34)
2023
-
Design, manufacturing and testing of 3D printed variable-stiffness laminates for improved open-hole tensile behaviour
Additive Manufacturing, Vol. 63
-
Predicting the effect of voids generated during RTM on the low-velocity impact behaviour by machine learning-based surrogate models
Composites Part B: Engineering, Vol. 260
2022
-
Efecto de la separación fibra-matriz sobre las propiedades mecánicas de una viga forjada en poliamida reforzada con fibra de vidrio = Effect of the fiber-matrix separation on the mechanical properties of a fiberglass reinforced polyamide forged beam
Revista de Materiales Compuestos; Comunicaciones Matcomp21- Sostenibilidad y reciclaje - Fabricación, Vol. 7, Núm. 1, pp. 1-5
-
Effect of voids on the impact properties of Non-Crimp fabric carbon/epoxy laminates manufactured by liquid composite Moulding
Composite Structures, Vol. 297
-
Optimization of the CRTM process by means of monitoring techniques
Revista de Materiales Compuestos
2021
-
Impregnation quality diagnosis in Resin Transfer Moulding by machine learning
Composites Part B: Engineering, Vol. 221
-
Quasi-static and dynamic crush behaviour of 3D printed thin-walled profiles reinforced with continuous carbon and glass fibres
Composites Part B: Engineering, Vol. 217
-
The effect of cross-section geometry on crushing behaviour of 3D printed continuous carbon fibre reinforced polyamide profiles
Composite Structures, Vol. 274
2020
-
Characterization of elastic and resistance behaviours of 3D printed continuous carbon fibre reinforced thermoplastics
ECCM 2018 - 18th European Conference on Composite Materials
-
Sensitivity to race-tracking of compression resin transfer moulding
ECCM 2018 - 18th European Conference on Composite Materials
2019
-
Enhanced energy absorption properties in 3D printed polymer matrix composite
ECCM 2018 - 18th European Conference on Composite Materials
-
Over-3D printing of continuous carbon fibre composites on organo-sheet substrates
AIP Conference Proceedings
2018
-
Simulation and experimental validation of the effect of material and processing parameters on the injection stage of compression resin transfer molding
Polymer Composites, Vol. 39, Núm. 12, pp. 4333-4340
2016
-
Dynamic 4 ENF test for a strain rate dependent mode II interlaminar fracture toughness characterization of unidirectional carbon fibre epoxy composites
Polymer Testing, Vol. 55, pp. 212-218
-
Impact behaviour of glass fibre-reinforced epoxy/aluminium fibre metal laminate manufactured by Vacuum Assisted Resin Transfer Moulding
Composite Structures, Vol. 140, pp. 118-124
-
Rate-dependent phenomenological model for self-reinforced polymers
Composites Part A: Applied Science and Manufacturing, Vol. 84, pp. 96-102
-
Repeated low energy impact behaviour of self-reinforced polypropylene fibre metal laminates
ECCM 2016 - Proceeding of the 17th European Conference on Composite Materials
-
The compression behaviour of non-crimp fabrics composites for automotive applications
ECCM 2016 - Proceeding of the 17th European Conference on Composite Materials
2015
-
Loading rate dependency on mode I interlaminar fracture toughness of unidirectional and woven carbon fibre epoxy composites
Composite Structures, Vol. 121, pp. 75-82
-
Quasi-static crush energy absorption capability of E-glass/polyester and hybrid E-glass-basalt/polyester composite structures
Materials and Design, Vol. 76, pp. 18-25