Publications (196) Publications auxquelles un chercheur a participé

2024

  1. A general kinematic model for lubricated ball bearings based on the minimum energy hypothesis

    Tribology International, Vol. 196

  2. Benchmarking of spectral methods for fatigue assessment of mooring systems and dynamic cables in offshore renewable energy technologies

    Ocean Engineering, Vol. 308

  3. High-temperature tribological performance of functionally graded Stellite 6/WC metal matrix composite coatings manufactured by laser-directed energy deposition

    Friction, Vol. 12, Núm. 3, pp. 522-538

  4. Impact of surface roughness on the coefficient of friction of polymer-on-polymer contacts for deflection pulley-rope systems in the lift industry

    Friction, Vol. 12, Núm. 9, pp. 2126-2138

  5. Influence of turning parameters on residual stresses and roughness of 42CrMo4 + QT

    International Journal of Advanced Manufacturing Technology, Vol. 134, Núm. 5-6, pp. 2897-2919

  6. Machine learning model of acoustic signatures: Towards digitalised thermal spray manufacturing

    Mechanical Systems and Signal Processing, Vol. 208, pp. 111030

  7. Non-destructive experimental technique to determine ball contact load in rolling machine elements

    Tribology International, Vol. 195

  8. Numerical characterisation of reaction forces’ contribution to initial stiffness in speed-lock beam-to-upright connections

    Journal of Constructional Steel Research, Vol. 223

  9. Numerical study on the effectiveness of the optimization of the load distribution in ball screw actuators

    Mechanism and Machine Theory, Vol. 203

  10. On the use of machine learning for predicting femtosecond laser grooves in tribological applications

    Tribology International, Vol. 200

  11. Prediction of the maximum tooth root stress for fatigue analysis of highly crowned spherical gear couplings working at high misaligned conditions

    Mechanism and Machine Theory, Vol. 201

  12. Turning of 42CrMo4+QT under different scenarios: Dataset of machining, roughness and residual stress

    Data in Brief

2023

  1. Análisis de distribución de carga en husillos a bolas para altas cargas mediante modelos de elementos finitos optimizados

    XXIV Congreso Nacional de Ingeniería Mecánica

  2. Análisis del efecto del shot-peening y el cementado en la vida a fatiga de los engranajes

    Revista española de mecánica de la fractura, Núm. 5, pp. 151-156

  3. Application of the theory of critical distances for fatigue life assessment of spur gears

    Theoretical and Applied Fracture Mechanics, Vol. 128

  4. Aumento de la precisión de posicionado de células robóticas en aplicaciones de mecanizado

    XXIV Congreso Nacional de Ingeniería Mecánica

  5. Evaluación probabilística del vidrio templado basada en simulación multifísica avanzada de proceso y desempeño

    Revista española de mecánica de la fractura, Núm. 5, pp. 145-150

  6. Evolución de la fatiga superficial en engranajes de acero al carbono

    XXIV Congreso Nacional de Ingeniería Mecánica

  7. Geometry optimisation of highly crowned gear couplings working in high misalignment applications to reduce tooth root stresses

    MATEC Web of Conferences

  8. Influence of the velocity on quasi-static deflections of industrial articulated robots

    International Journal of Advanced Manufacturing Technology, Vol. 125, Núm. 3-4, pp. 1429-1438