Publicaciones (28) Publicaciones en las que ha participado algún/a investigador/a

2020

  1. A study of the effects of the magnetization tolerance in the manufacturing process on permanent magnet synchronous machines

    2020 10th International Electric Drives Production Conference, EDPC 2020 - Proceedings

  2. An approach to analyse the factors behind the micromechanical response of 3D-printed composites

    Composites Part B: Engineering, Vol. 186

  3. Analysis of axial crushing behaviour of unsaturated polyester and vinyl ester composites manufactured by out of die ultraviolet cured pultrusion

    ECCM 2018 - 18th European Conference on Composite Materials

  4. Analysis of the dynamic characterisation and behaviour of an elevator rope

    Proceedings of ISMA 2020 - International Conference on Noise and Vibration Engineering and USD 2020 - International Conference on Uncertainty in Structural Dynamics

  5. Analysis of the noise attenuation in ducts by means of rigid perforated panels

    Proceedings of ISMA 2020 - International Conference on Noise and Vibration Engineering and USD 2020 - International Conference on Uncertainty in Structural Dynamics

  6. Characterization of elastic and resistance behaviours of 3D printed continuous carbon fibre reinforced thermoplastics

    ECCM 2018 - 18th European Conference on Composite Materials

  7. Comfort improvement of an elevator car by viscoelastic sandwich panels

    Proceedings of ISMA 2020 - International Conference on Noise and Vibration Engineering and USD 2020 - International Conference on Uncertainty in Structural Dynamics

  8. Comparison between cryogenic coolants effect on tool wear and surface integrity in finishing turning of Inconel 718

    Journal of Materials Processing Technology, Vol. 285

  9. Continuous improvement framework to develop cultural change: case study, capital goods company

    TQM Journal, Vol. 32, Núm. 6, pp. 1327-1348

  10. Critical Analysis of Coefficient of Friction Derivation Methods for Fretting under Gross Slip Regime

    Tribology International, Vol. 143

  11. Critical Analysis of the Suitability of Surrogate Models for Finite Element Method Application in Catalog-Based Suspension Bushing Design

    IEEE International Conference on Emerging Technologies and Factory Automation, ETFA

  12. Development of a novel method to characterize mean surface peak curvature as a signature of tribological performance of dental implant surfaces

    Surface Topography: Metrology and Properties, Vol. 8, Núm. 2

  13. Framework to evaluate continuous improvement process efficacy: A case study of a capital goods company

    Quality Innovation Prosperity, Vol. 24, Núm. 2, pp. 93-119

  14. General homogenised formulation for thick viscoelastic layered structures for finite element applications

    Mathematics, Vol. 8, Núm. 5

  15. Homogenised formulation for plates with thick constrained viscoelastic core

    Computers and Structures, Vol. 229

  16. Influence of manufacturing tolerances and eccentricities on the unbalanced magnetic pull in permanent magnet synchronous motors

    Proceedings - 2020 International Conference on Electrical Machines, ICEM 2020

  17. Modelling of an additive 3D-printing process based on design of experiments methodology

    Quality Innovation Prosperity, Vol. 24, Núm. 1, pp. 128-151

  18. On the role of contact and system stiffness in the measurement of principal variables in fretting wear testing

    Sensors (Switzerland), Vol. 20, Núm. 15, pp. 1-20

  19. On the use of the theory of critical distances with mesh control for fretting fatigue lifetime assessment

    Tribology International, Vol. 142

  20. Quantification of dental implant surface wear and topographical modification generated during insertion

    Surface Topography: Metrology and Properties, Vol. 8, Núm. 1