Publicaciones (26) Publicaciones en las que ha participado algún/a investigador/a

2022

  1. A NUMERICAL INVESTIGATION OF THE INTER-LAYER BOND AND SURFACE ROUGHNESS DURING THE YIELD STRESS BUILDUP IN WET-ON-WET MATERIAL EXTRUSION ADDITIVE MANUFACTURING

    2022 ASPE and euspen Summer Topical Meeting on Advancing Precision in Additive Manufacturing

  2. A Simple and Effective Excitation Force Estimator for Wave Energy Systems

    IEEE Transactions on Sustainable Energy, Vol. 13, Núm. 1, pp. 241-250

  3. A data-driven long-term metocean data forecasting approach for the design of marine renewable energy systems

    Renewable and Sustainable Energy Reviews, Vol. 167

  4. A novel direct liquid cooling strategy for electric vehicles focused on pouch type battery cells

    Applied Thermal Engineering, Vol. 216

  5. A post-processing technique for removing ‘irregular frequencies’ and other issues in the results from BEM solvers

    International Marine Energy Journal, Vol. 5, Núm. 1, pp. 123-131

  6. Analysis of thermophoresis for separation of polystyrene microparticles in microfluidic devices

    International Journal of Heat and Mass Transfer, Vol. 189

  7. CFD Analysis of Can Heating Process

    Fluid Dynamics and Materials Processing, Vol. 18, Núm. 4, pp. 1129-1136

  8. Context-informed conditional anomaly detection approach for wave power plants: The case of air turbines

    Ocean Engineering, Vol. 253

  9. Control co-design of power take-off parameters for wave energy systems

    IFAC-PapersOnLine

  10. Determination of the effective diffusion coefficient of ternary mixtures in the thermogravitational micro-column using optical digital interferometry

    European Physical Journal Plus, Vol. 137, Núm. 9

  11. EXTRUSION HEAD GEOMETRY INFLUENCE ON STRAND WALL UNIFORMITY IN ADDITIVE MANUFACTURING

    2022 ASPE and euspen Summer Topical Meeting on Advancing Precision in Additive Manufacturing

  12. Experimental assessment of scale-effects on the aerodynamic characterization of a transitionally-operating airfoil working under clean flow conditions

    Measurement: Journal of the International Measurement Confederation, Vol. 188

  13. Frequency-Domain Identification of Radiation Forces for Floating Wind Turbines by Moment-Matching

    Materials Research Proceedings

  14. Influence of the test-chamber shape on the performance of conductometric gas sensors

    Sensors and Actuators B: Chemical, Vol. 361

  15. MODELLING OF ADDITIVE MANUFACTURING - COMPRESSION MOLDING PROCESS USING COMPUTATIONAL FLUID DYNAMICS

    2022 ASPE and euspen Summer Topical Meeting on Advancing Precision in Additive Manufacturing

  16. Numerical analysis of different mass transfer models for falling film absorbers

    International Journal of Heat and Mass Transfer, Vol. 182

  17. Numerical methodology based on fluid-structure interaction to predict the residual stress distribution in glass tempering considering non-uniform cooling

    Computers and Structures, Vol. 264

  18. Numerical-probabilistic assessment of tempered glass failure based on the generalised local model characterised by annealed plates

    Engineering Fracture Mechanics, Vol. 274

  19. On the Importance of High–Fidelity Numerical Modelling of Ocean Wave Energy Converters under Controlled Conditions

    Materials Research Proceedings

  20. Optimal Control of Wave Energy Devices with Nonlinear Reactive Power Constraints

    IFAC-PapersOnLine