Borja Erice Echavarri-rekin lankidetzan egindako argitalpenak (52)

2024

  1. Effect of the loading-rate and stress state on the constitutive modelling and fracture of 2205 Duplex stainless steel

    International Journal of Impact Engineering, Vol. 191

  2. Impact behaviour of bio-inspired sandwich panels integrally manufactured from 3D printed continuous carbon fibre reinforced polyamide

    Composites Science and Technology, Vol. 250

  3. Low-velocity impact performance of integrally-3D printed continuous carbon fibre composite sandwich panels

    Materials Letters, Vol. 354

2023

  1. A comprehensive experimental investigation of the rate-dependent interlaminar delamination behaviour of CFRP composites

    Composites Part B: Engineering, Vol. 261

  2. A mechanistic-finite element hybrid approach to modelling cutting forces when drilling GFRP-AISI 304 stacks

    CIRP Annals, Vol. 72, Núm. 1, pp. 69-72

  3. An automatic thermo-mechanical testing apparatus for metal forming applications

    International Journal of Impact Engineering, Vol. 182

  4. Anisotropic plasticity and fracture modelling of cold rolled AA5754

    Engineering Fracture Mechanics, Vol. 289

  5. Dynamic fracture initiation of high-strength metals

    Revista española de mecánica de la fractura, Núm. 5, pp. 139-144

  6. Effect of near beta-transus forging parameters on the mechanical and microstructural properties of Ti-6Al-4V – Application to hammer forging

    Materials Research Proceedings

  7. Modelling the Non-linear fibre and matrix dominated compressive behaviour in unidirectional Fibre-reinforced composites

    Composite Structures, Vol. 304

2022

  1. An integrated inverse numerical–experimental approach to determine the dynamic Mode-I interlaminar fracture toughness of fibre composites

    Composite Structures, Vol. 293

  2. Forming limit curve prediction with neural network for non-proportional loadings

    Revista española de mecánica de la fractura, Núm. 4, pp. 95-99

2020

  1. Crystal-plasticity-finite-element modeling of the quasi-static and dynamic response of a directionally solidified nickel-base superalloy

    Materials, Vol. 13, Núm. 13, pp. 1-15

  2. Fracture mechanisms in largely strained solids due to surface instabilities

    International Journal of Solids and Structures, Vol. 199, pp. 190-202

  3. Multi-material adhesively bonded structures: Characterisation and modelling of their rate-dependent performance

    Composites Part B: Engineering, Vol. 195

  4. On the dynamic response of adhesively bonded structures

    International Journal of Impact Engineering, Vol. 138

  5. Strain-rate and off-axis loading effects on the fibre compression strength of CFRP laminates: Experiments and constitutive modelling

    Composites Science and Technology, Vol. 195

2019

  1. A study on the longitudinal compression strength of fibre reinforced composites under uniaxial and off-axis loads using cross-ply laminate specimens

    Composites Part A: Applied Science and Manufacturing, Vol. 121, pp. 213-222

  2. Experimental determination of the dynamic fracture-initiation toughness of high-strength metals

    Engineering Fracture Mechanics, Vol. 205, pp. 498-510

  3. Predictions of the mechanical properties of unidirectional fibre composites by supervised machine learning

    Scientific Reports, Vol. 9, Núm. 1