Publicaciones (28) Publicaciones en las que ha participado algún/a investigador/a

2013

  1. Development of a carbon fibre composite body for a radio controlled car through a PBL approach

    41st SEFI Conference

  2. Effects of rotational speed, feed rate and tool type on temperatures and cutting forces when drilling bovine cortical bone

    Machining Science and Technology, Vol. 17, Núm. 4, pp. 611-636

  3. Experimental and numerical analysis of indentation on a thermoplastic polyurethane elastomer under cyclic loading

    Constitutive Models for Rubber VIII (CRC Press), pp. 649-655

  4. Experimental and numerical analysis of indentation on a thermoplastic polyurethane elastomer under cyclic loading

    Constitutive Models for Rubber VIII - Proceedings of the 8th European Conference on Constitutive Models for Rubbers, ECCMR 2013

  5. Experimental characterization and modelling of large-strain viscoelastic behavior of a thermoplastic polyurethane elastomer

    Rubber Chemistry and Technology, Vol. 86, Núm. 1, pp. 146-164

  6. Finite element simulation of fretting wear and fatigue in thin steel wires

    International Journal of Fatigue, Vol. 55, pp. 7-21

  7. KIMU BERRI, A UNIVERSITY-INDUSTRY EXPERIENCE FOR PROMOTING YOUTH ENTREPRENEURIAL MINDSET

    7TH INTERNATIONAL TECHNOLOGY, EDUCATION AND DEVELOPMENT CONFERENCE (INTED2013)

  8. LEGO SERIOUS PLAY AS A TOOL FOR BUILDING THE INNOVATION MANAGEMENT CONCEPT

    7TH INTERNATIONAL TECHNOLOGY, EDUCATION AND DEVELOPMENT CONFERENCE (INTED2013)

  9. Linear viscoelastic behaviour of magnetorheological elastomers

    Constitutive Models for Rubber VIII (CRC Press), pp. 665-670

  10. Linear viscoelastic behaviour of magnetorheological elastomers

    Constitutive Models for Rubber VIII - Proceedings of the 8th European Conference on Constitutive Models for Rubbers, ECCMR 2013

  11. Modification of the ultrasonic properties of elastomers loaded with magnetic particles by applying magnetic fields during curing

    IEEE International Ultrasonics Symposium, IUS

  12. Numerical characterization of pressure drop through a low speed wind tunnel: Some design aspects

    Proceedings of 2013 International Renewable and Sustainable Energy Conference, IRSEC 2013

  13. Numerical modeling and design of thermoelectric cooling systems and its application to manufacturing machines

    Journal of Electronic Materials, Vol. 42, Núm. 7, pp. 2287-2291

  14. Numerical study of the pressure drop phenomena in wound woven wire matrix of a Stirling regenerator

    Energy Conversion and Management, Vol. 67, pp. 57-65

  15. Polymer-based microfluidic devices for rare cell detection by ultrasounds

    2013 IEEE SENSORS

  16. Polymer-based microfluidic devices for rare cell detection by ultrasounds

    Proceedings of IEEE Sensors

  17. QUALITY ASSURANCE IN HIGHER EDUCATION: MONDRAGON UNIVERSITY'S JOURNEY FROM 1995

    7TH INTERNATIONAL TECHNOLOGY, EDUCATION AND DEVELOPMENT CONFERENCE (INTED2013)

  18. Relaxation modulus - Complex modulus interconversion for linear viscoelastic materials

    Mechanics of Time-Dependent Materials, Vol. 17, Núm. 3, pp. 465-479

  19. Remarks on the analysis method for determining diffusion coefficient in ternary mixtures

    Comptes Rendus - Mecanique

  20. TECHNO-CUBE, A PROBLEM-BASED LEARNING PROJECT BASED ON CURRENT INDUSTRY DEMANDS

    7TH INTERNATIONAL TECHNOLOGY, EDUCATION AND DEVELOPMENT CONFERENCE (INTED2013)