Publicaciones en las que colabora con Jon Aurrekoetxea Narbarte (30)

2024

  1. Definition of 3D Printing Parameters by the Design of Experiments to Characterise Carbon Fibre-Reinforced Polyamide

    Proceedings of the 17th International Conference on Industrial Engineering and Industrial Management (ICIEIM) – XXVII Congreso de Ingeniería de Organización (CIO2023), pp. 1-6

2023

  1. Predicting the effect of voids generated during RTM on the low-velocity impact behaviour by machine learning-based surrogate models

    Composites Part B: Engineering, Vol. 260

2018

  1. Effect of the manufacturing process on the energy absorption capability of GFRP crush structures

    Composite Structures, Vol. 187, pp. 316-324

2016

  1. Effect of fibre volume fraction on energy absorption capabilities of E-glass/polyester automotive crash structures

    Composites Part B: Engineering, Vol. 85, pp. 1-7

  2. Optimization of the semi-hexagonal geometry of a composite crush structure by finite element analysis

    Composites Part B: Engineering, Vol. 93, pp. 56-66

  3. Rate-dependent phenomenological model for self-reinforced polymers

    Composites Part A: Applied Science and Manufacturing, Vol. 84, pp. 96-102

  4. The compression behaviour of non-crimp fabrics composites for automotive applications

    ECCM 2016 - Proceeding of the 17th European Conference on Composite Materials

2015

  1. Out of die ultraviolet cured pultrusion for automotive crash structures

    Composites Part B: Engineering, Vol. 79, pp. 209-216

  2. Quasi-static crush energy absorption capability of E-glass/polyester and hybrid E-glass-basalt/polyester composite structures

    Materials and Design, Vol. 76, pp. 18-25

2014

  1. Impact characterization of thermoformable fibre metal laminates of 2024-T3 aluminium and AZ31B-H24 magnesium based on self-reinforced polypropylene

    Composites Part A: Applied Science and Manufacturing, Vol. 61, pp. 67-75

  2. Prediction of the low-energy impact response of a self-reinforced polymer based on a rheolocial model

    16th European Conference on Composite Materials, ECCM 2014

  3. Zuntz eta erretxina motaren eragina inpaktu egituren energia xurgapen ahalmenean

    II Materialen Zientzia eta Teknologia Kongresua

2013

  1. Development of a carbon fibre composite body for a radio controlled car through a PBL approach

    41st SEFI Conference

  2. The influences of deformation state and experimental conditions on inelastic behaviour of an extruded thermoplastic polyurethane elastomer

    Materials and Design, Vol. 49, pp. 974-980

2012

  1. Impact characterization and simulation of a FML based on a self-reinforced polypropylene

    ECCM 2012 - Composites at Venice, Proceedings of the 15th European Conference on Composite Materials

2011

  1. Comportamiento tribológico de poli(butilen tereftalato) reforzado con fibra de carbono obtenido mediante Resin Transfer Moulding

    Actas del IX Congreso Nacional de Materiales Compuestos: Girona, 5, 6, 7 y 8 de julio de 2011

2009

  1. Effect of impact-induced strain on the stress-induced martensitic transformation of superelastic NiTi shape-memory alloy wires

    Journal of Materials Engineering and Performance, Vol. 18, Núm. 5-6, pp. 600-602

  2. Low-energy tensile-impact behavior of superelastic NiTi shape memory alloy wires

    Mechanics of Materials, Vol. 41, Núm. 9, pp. 1050-1058

2008

  1. Characterization of recycling induced degradation based on fracture mechanics approach

    Recycling: New Research (Nova Science Publishers, Inc.), pp. 89-124

  2. Constitutive model taking into account the strain rate for uniaxial NiTi shape memory alloy under low velocity impact conditions

    Smart Materials and Structures, Vol. 17, Núm. 6