Publicaciones (42) Publicaciones en las que ha participado algún/a investigador/a

2021

  1. A Novel Methodology for the Characterization of Cutting Conditions in Turning Processes Using Machine Learning Models and Acoustic Emission Signals

    16th International Conference on Soft Computing Models in Industrial and Environmental Applications (SOCO 2021)

  2. A coupled 3D wear and fatigue numerical procedure: Application to fretting problems in ultra-high strength steel wires

    International Journal of Fatigue, Vol. 143

  3. A novel machine learning‐based methodology for tool wear prediction using acoustic emission signals

    Sensors, Vol. 21, Núm. 17

  4. A novel methodology to characterize tool-chip contact in metal cutting using partially restricted contact length tools

    CIRP Annals, Vol. 70, Núm. 1, pp. 61-64

  5. Abiadura handiko entseguak egiteko forjaketa-mailu baten garapena

    Ingeniaritza eta arkitektura: IV. Ikergazte Nazioarteko Ikerteta Euskaraz. 2021eko ekainaren 9, 10 eta . Gasteiz, Euskal Herria.

  6. An analytical approach to calculate stress concentration factors of machined surfaces

    International Journal of Mechanical Sciences, Vol. 190

  7. Analysis of the tool stick-out influence on machining chatter

    ESAFORM 2021 - 24th International Conference on Material Forming

  8. Analytical-method for polishing-surface prediction considering tool flexibility and grain-material interaction

    Journal of Materials Processing Technology, Vol. 295

  9. Comparative study of finishing techniques for age-hardened Inconel 718 alloy

    Journal of Materials Research and Technology, Vol. 15, pp. 5623-5634

  10. Contact pressure and sliding velocity ranges in sheet metal forming simulations

    ESAFORM 2021 - 24th International Conference on Material Forming

  11. Contact pressure, sliding velocity and viscosity dependent friction behavior of lubricants used in tube hydroforming processes

    ESAFORM 2021 - 24th International Conference on Material Forming

  12. Development and experimental validation of a macroscopic analytical model aiming to generate metal-FRP stacks drilling cutting force and torque

    ESAFORM 2021 - 24th International Conference on Material Forming

  13. Drilling process monitoring: A framework for data gathering and feature extraction techniques

    Procedia CIRP

  14. Experimental Investigation of Contact Forces and Temperatures in Rubbing Interactions of Honeycomb Interstate Seals

    Manufacturing Engineering Society International Conference, MESIC 9: Gijόn, 2021, Spain, June 23-24-25

  15. Experimental and FEM analysis of dry and cryogenic turning of hardened steel 100Cr6 using CBN Wiper tools

    Procedia CIRP

  16. Experimental evaluation and surface integrity analysis of cryogenic coolants approaches in the cylindrical plunge grinding

    Scientific Reports, Vol. 11, Núm. 1

  17. Friction stir welding of aa2099-t83 and aa2060-t8e30 aluminium alloys with new cr-free surface treatments and sealant application

    Metals, Vol. 11, Núm. 4

  18. Generative design of 3D printed grippers for robot/human collaborative environments

    2021 IEEE International Workshop of Electronics, Control, Measurement, Signals and their Application to Mechatronics, ECMSM 2021

  19. High-Speed Material Characterization Using an Instrumented Forging Hammer

    Minerals, Metals and Materials Series

  20. Identification of interaction mechanisms during drag finishing by means of an original macroscopic numerical model

    International Journal of Machine Tools and Manufacture, Vol. 168