Publicaciones en colaboración con investigadores/as de Universidad de Málaga (10)

2024

  1. Multiphysics modeling and experimental validation of heat and mass transfer for the vacuum induction melting process

    Applied Thermal Engineering, Vol. 243

2023

  1. Effect of the crucible composition on the Inconel 718 vacuum induction melting process efficiency

    Journal of Materials Research and Technology, Vol. 23, pp. 3351-3361

2022

  1. Fibre–Wood Laminate Biocomposites: Seawater Immersion Effects on Flexural and Low Energy Impact Properties

    Polymers, Vol. 14, Núm. 19

2018

  1. Influence of the deformation rate on the delamination of laminated composite materials

    Key Engineering Materials

2016

  1. Dynamic 4 ENF test for a strain rate dependent mode II interlaminar fracture toughness characterization of unidirectional carbon fibre epoxy composites

    Polymer Testing, Vol. 55, pp. 212-218

2015

  1. Loading rate dependency on mode I interlaminar fracture toughness of unidirectional and woven carbon fibre epoxy composites

    Composite Structures, Vol. 121, pp. 75-82

2014

  1. Impact velocity effect on the delamination of woven carbon-epoxy plates subjected to low-velocity equienergetic impact loads

    Composites Science and Technology, Vol. 94, pp. 48-53

2012

  1. Effects of the velocity in the delamination of carbon-epoxy plates subjected to low-velocity impact load

    ECCM 2012 - Composites at Venice, Proceedings of the 15th European Conference on Composite Materials

2011

  1. Concepción, caracterización y simulación de un laminado activo SMA-pCBT

    Actas del IX Congreso Nacional de Materiales Compuestos: Girona, 5, 6, 7 y 8 de julio de 2011

  2. Conception of crash tests for composite tubular structures

    ICCM International Conferences on Composite Materials