Publicaciones en las que colabora con Ivan Saenz Dominguez (12)

2024

  1. Impact and notched strength of multiaxially reinforced out of die UV cured pultruded profiles

    Polymer Composites, Vol. 45, Núm. 5, pp. 4348-4358

2023

  1. Paneles fabricados mediante curado UV de prepregs fuera de autoclave reforzados con perfiles de pultrusión UV

    Comunicaciones Congreso Nacional de Materiales Compuestos (MATCOMP21 y MATCOMP23). Sevilla, 21-23 Junio, 2022

2020

  1. An analytical model of through-thickness photopolymerisation of composites: Ultraviolet light transmission and curing kinetics

    Composites Part B: Engineering, Vol. 191

  2. Analysis of axial crushing behaviour of unsaturated polyester and vinyl ester composites manufactured by out of die ultraviolet cured pultrusion

    ECCM 2018 - 18th European Conference on Composite Materials

  3. Effect of alumina tri-hydrate filler on the mechanical and optical properties of flame-retardant ultraviolet cured vinyl ester composites

    ECCM 2018 - 18th European Conference on Composite Materials

2019

  1. Design and characterisation of cellular composite structures for automotive crash-boxes manufactured by out of die ultraviolet cured pultrusion

    Composites Part B: Engineering, Vol. 160, pp. 217-224

  2. Monitoring the evolution of stiffness during ultraviolet curing of a vinyl ester resin with quasi-normal air-coupled ultrasonic spectroscopy

    Polymer Testing, Vol. 80

  3. Pultrusión basada en el curado uv fuera del molde: desarrollo de componentes dirigidos a la industria de la automoción

    Pultrusión basada en el curado uv fuera del molde: desarrollo de componentes dirigidos a la industria de la automoción

2018

  1. Effect of the manufacturing process on the energy absorption capability of GFRP crush structures

    Composite Structures, Vol. 187, pp. 316-324

  2. Effect of ultraviolet curing kinetics on the mechanical properties of out of die pultruded vinyl ester composites

    Composites Part A: Applied Science and Manufacturing, Vol. 109, pp. 280-289

2016

  1. Characterisation of ultraviolet curing resins for 3D pultrusion

    ECCM 2016 - Proceeding of the 17th European Conference on Composite Materials

  2. Out of die ultraviolet pultrusion process set-up: Limitations of photo-differential scanning calorimetry analysis

    ECCM 2016 - Proceeding of the 17th European Conference on Composite Materials