Publicacions en què col·labora amb Jon Ander Esnaola Ramos (29)

2022

  1. Effect of surface integrity generated by machining on isothermal low cycle fatigue performance of Inconel 718

    Engineering Failure Analysis, Vol. 137

2019

  1. Fatigue life estimation of cast aluminium alloys considering the effect of porosity on initiation and propagation phases

    International Journal of Fatigue, Vol. 125, pp. 468-478

  2. Influencia del acabado superficial y la porosidad en el comportamiento a fatiga de la aleación A356

    Anales de mecánica de la fractura, Núm. 36, pp. 581-585

2018

  1. Determining tool/chip temperatures from thermography measurements in metal cutting

    Applied Thermal Engineering, Vol. 145, pp. 305-314

  2. Effect of single and double solution treatment on second phase dissolution of an Al-8.5Si-1.5Cu-0.4Mg alloy with different initial cooling rates

    73rd World Foundry Congress "Creative Foundry", WFC 2018 - Proceedings

  3. Influence of Surface Finish and Porosity on the Fatigue behaviour of A356 Aluminium Casting Alloy

    MATEC Web of Conferences

  4. Preliminar mechanical properties and microstructures obtained after casting a modified Al-Zn-Mg wrought alloy

    73rd World Foundry Congress "Creative Foundry", WFC 2018 - Proceedings

2017

  1. A Coupled Eulerian Lagrangian Model to Predict Fundamental Process Variables and Wear Rate on Ferrite-pearlite Steels

    Procedia CIRP

  2. Effect of Thermal Annealing on Machining-Induced Residual Stresses in Inconel 718

    Journal of Materials Engineering and Performance, Vol. 26, Núm. 8, pp. 3728-3738

2015

  1. Stability of machining induced residual stresses in Inconel 718 under quasi-static loading at room temperature

    Materials Science and Engineering A, Vol. 620, pp. 129-139

2014

  1. Analysis of residual stress and work-hardened profiles on Inconel 718 when face turning with large-nose radius tools

    International Journal of Advanced Manufacturing Technology, Vol. 71, Núm. 9-12, pp. 1587-1598

  2. Evolution of residual stresses induced by machining in a nickel based alloy under static loading at room temperature

    Procedia CIRP

  3. On the machining induced residual stresses in IN718 nickel-based alloy: Experiments and predictions with finite element simulation

    Simulation Modelling Practice and Theory, Vol. 41, pp. 87-103

  4. Warm forming of Mg sheets: From incremental to electromagnetic forming

    Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science

2012

  1. Evolution of texture and microstructure of AZ31 Mg alloy sheet at high strain rates

    Materials Science Forum

2010

  1. Instalación piloto para hidroconformado de tubo en caliente: de aleaciones de aluminio y aleaciones de magnesio

    IMHE: Información de máquinas-herramienta, equipos y accesorios, Núm. 374, pp. 76-80

  2. Tensile behaviour of 6082 aluminium alloy sheet under different conditions of heat treatment, temperature and strain rate

    Key Engineering Materials

2008

  1. Hidroconformado de chapa a temperaturas medias

    IMHE: Información de máquinas-herramienta, equipos y accesorios, Núm. 352, pp. 10-16

  2. Instalación piloto de hydroforming para prototipado de piezas industriales: ejemplo de hidroconformado de un pedal de freno

    IMHE: Información de máquinas-herramienta, equipos y accesorios, Núm. 354, pp. 150-154

  3. New concept for the manufacturing of an industrial car brake, Process development and performance study

    9th International Conference on Technology of Plasticity, ICTP 2008