Publications by the researcher in collaboration with Jon Aurrekoetxea Narbarte (17)
2024
-
Impact and notched strength of multiaxially reinforced out of die UV cured pultruded profiles
Polymer Composites, Vol. 45, Núm. 5, pp. 4348-4358
2023
-
Paneles fabricados mediante curado UV de prepregs fuera de autoclave reforzados con perfiles de pultrusión UV
Comunicaciones Congreso Nacional de Materiales Compuestos (MATCOMP21 y MATCOMP23). Sevilla, 21-23 Junio, 2022
2022
-
Impact performance of out of die UV cured pultruded profiles for vessel structures
ECCM 2022 - Proceedings of the 20th European Conference on Composite Materials: Composites Meet Sustainability
2020
-
An analytical model of through-thickness photopolymerisation of composites: Ultraviolet light transmission and curing kinetics
Composites Part B: Engineering, Vol. 191
-
Analysis of axial crushing behaviour of unsaturated polyester and vinyl ester composites manufactured by out of die ultraviolet cured pultrusion
ECCM 2018 - 18th European Conference on Composite Materials
-
Effect of alumina tri-hydrate filler on the mechanical and optical properties of flame-retardant ultraviolet cured vinyl ester composites
ECCM 2018 - 18th European Conference on Composite Materials
2019
-
Design and characterisation of cellular composite structures for automotive crash-boxes manufactured by out of die ultraviolet cured pultrusion
Composites Part B: Engineering, Vol. 160, pp. 217-224
-
Monitoring the evolution of stiffness during ultraviolet curing of a vinyl ester resin with quasi-normal air-coupled ultrasonic spectroscopy
Polymer Testing, Vol. 80
2018
-
Effect of the manufacturing process on the energy absorption capability of GFRP crush structures
Composite Structures, Vol. 187, pp. 316-324
-
Effect of ultraviolet curing kinetics on the mechanical properties of out of die pultruded vinyl ester composites
Composites Part A: Applied Science and Manufacturing, Vol. 109, pp. 280-289
2016
-
Characterisation of ultraviolet curing resins for 3D pultrusion
ECCM 2016 - Proceeding of the 17th European Conference on Composite Materials
-
Effect of fibre volume fraction on energy absorption capabilities of E-glass/polyester automotive crash structures
Composites Part B: Engineering, Vol. 85, pp. 1-7
-
Out of die ultraviolet pultrusion process set-up: Limitations of photo-differential scanning calorimetry analysis
ECCM 2016 - Proceeding of the 17th European Conference on Composite Materials
-
The effect of process parameters on ultraviolet cured out of die bent pultrusion process
Composites Part B: Engineering, Vol. 89, pp. 9-17
2015
-
Out of die ultraviolet cured pultrusion for automotive crash structures
Composites Part B: Engineering, Vol. 79, pp. 209-216
2014
-
Selection of led or conventional UV lamp based on the composite thickness
16th European Conference on Composite Materials, ECCM 2014
2012
-
Effect of thickness on the interfacial strenght of layer by layer in situ UV curing
ECCM 2012 - Composites at Venice, Proceedings of the 15th European Conference on Composite Materials