Publikationen, an denen er mitarbeitet Daniel Soler Mallol (12)

2022

  1. Mechanical properties of friction induced nanocrystalline pearlitic steel

    Scientific Reports, Vol. 12, Núm. 1

2021

  1. Experimental Investigation of Contact Forces and Temperatures in Rubbing Interactions of Honeycomb Interstate Seals

    Manufacturing Engineering Society International Conference, MESIC 9: Gijόn, 2021, Spain, June 23-24-25

2019

  1. Determination of emissivity and temperature of tool rake face when cutting AISI 4140

    Procedia Manufacturing

  2. Evaluation of different flow stress laws coupled with a physical based ductile failure criterion for the modelling of the chip formation process of Ti-6Al-4V under broaching conditions

    Procedia CIRP

  3. FEM modeling of hard turning 42CrMoS4 steel

    Procedia CIRP

  4. Innovative Method dedicated to the development of a ferrite-pearlite grade regarding its MAChinability (IMMAC)

    Innovative Method dedicated to the development of a ferrite-pearlite grade regarding its MAChinability: final report

  5. Microstructure based flow stress model to predict machinability in ferrite–pearlite steels

    CIRP Annals, Vol. 68, Núm. 1, pp. 49-52

  6. Modelización por elementos finitos del torneado de aceros en estado templado

    Revista DYNA, Vol. 94, Núm. 3, pp. 331-337

2018

  1. Determining tool/chip temperatures from thermography measurements in metal cutting

    Applied Thermal Engineering, Vol. 145, pp. 305-314

  2. Microstructural aspects of the transition between two regimes in orthogonal cutting of AISI 1045 steel

    Journal of Materials Processing Technology, Vol. 260, pp. 87-96

  3. New calibration method to measure rake face temperature of the tool during dry orthogonal cutting using thermography

    Applied Thermal Engineering, Vol. 137, pp. 74-82

2017

  1. A Coupled Eulerian Lagrangian Model to Predict Fundamental Process Variables and Wear Rate on Ferrite-pearlite Steels

    Procedia CIRP