Publications (28) Gorka Ortiz de Zarate Bengoa publications

2025

  1. Non-destructive procedure to determine residual stresses and white layers in hole making operations

    NDT and E International, Vol. 151

2024

  1. Analytical model to identify crack initiation in machined aluminium parts

    Procedia CIRP

  2. Broaching Digital Twin to Predict Forces, Local Overloads, and Surface Topography Irregularities

    Materials, Vol. 17, Núm. 22

  3. Combining experimental and FEM approaches to determine the influence of workpiece temperature on fundamental variables in the machining process

    Materials Research Proceedings

  4. Correcting distortions of thin-walled machined parts by machine hammer peening

    Chinese Journal of Aeronautics, Vol. 37, Núm. 6, pp. 439-453

2023

  1. Adiabatic self-heating determination for Ti6Al4V at different temperatures

    International Journal of Heat and Mass Transfer, Vol. 204

  2. Force Prediction Methodology for Complex Shape Broaching

    Procedia CIRP

2022

  1. Effect of Tool Geometry and LCO2 Cooling on Cutting Forces and Delamination when Drilling CFRP Composites Using PCD Tools

    Procedia CIRP

  2. Enhancing surface integrity of A7050-T7451 aluminium alloy by pneumatic machine hammer peening

    Procedia CIRP

  3. K2E: Building MLOps Environments for Governing Data and Models Catalogues while Tracking Versions

    2022 IEEE 19th International Conference on Software Architecture Companion (ICSA-C): 12-15 March 2022

  4. Surface topography irregularities generated by broaching

    CIRP Annals, Vol. 71, Núm. 1, pp. 105-108

2021

  1. A novel methodology to characterize tool-chip contact in metal cutting using partially restricted contact length tools

    CIRP Annals, Vol. 70, Núm. 1, pp. 61-64

  2. Experimental and FEM analysis of dry and cryogenic turning of hardened steel 100Cr6 using CBN Wiper tools

    Procedia CIRP

  3. In-SEM micro-machining reveals the origins of the size effect in the cutting energy

    Scientific Reports, Vol. 11, Núm. 1

  4. Inverse identification of the ductile failure law for ti6al4v based on orthogonal cutting experimental outcomes

    Metals, Vol. 11, Núm. 8

  5. Measurement of plastic strain and plastic strain rate during orthogonal cutting for Ti-6Al-4V

    International Journal of Mechanical Sciences, Vol. 198

2020

  1. Sensitivity analysis of the input parameters of a physical based ductile failure model of Ti-6Al-4V for the prediction of surface integrity

    Procedia CIRP

  2. Surface drag analysis after Ti-6Al-4V orthogonal cutting using grid distortion

    Procedia CIRP

2019

  1. A mechanistic model to predict cutting force on orthogonal machining of Aluminum 7475-T7351 considering the edge radius

    Procedia CIRP

  2. Evaluation of different flow stress laws coupled with a physical based ductile failure criterion for the modelling of the chip formation process of Ti-6Al-4V under broaching conditions

    Procedia CIRP