Publicaciones en las que colabora con Pedro Jose Arrazola Arriola (31)

2024

  1. Analytical model to identify crack initiation in machined aluminium parts

    Procedia CIRP

  2. Correcting distortions of thin-walled machined parts by machine hammer peening

    Chinese Journal of Aeronautics, Vol. 37, Núm. 6, pp. 439-453

2023

  1. Force Prediction Methodology for Complex Shape Broaching

    Procedia CIRP

  2. Influence of cryogenic grinding surface on fatigue performance of carburised 27MnCr5

    Journal of Materials Research and Technology, Vol. 23, pp. 1792-1804

  3. Mechanical Properties and Fatigue Performance of 17-4 PH Stainless Steel Manufactured by Atomic Diffusion Additive Manufacturing Technology

    Journal of Manufacturing and Materials Processing, Vol. 7, Núm. 5

2022

  1. Effect of innovative finishing operations on the tribological performance of steel 27MnCr5

    Procedia CIRP

  2. Effect of surface integrity generated by machining on isothermal low cycle fatigue performance of Inconel 718

    Engineering Failure Analysis, Vol. 137

  3. Enhancing surface integrity of A7050-T7451 aluminium alloy by pneumatic machine hammer peening

    Procedia CIRP

  4. Surface topography irregularities generated by broaching

    CIRP Annals, Vol. 71, Núm. 1, pp. 105-108

2021

  1. A novel methodology to characterize tool-chip contact in metal cutting using partially restricted contact length tools

    CIRP Annals, Vol. 70, Núm. 1, pp. 61-64

  2. An analytical approach to calculate stress concentration factors of machined surfaces

    International Journal of Mechanical Sciences, Vol. 190

  3. Comparative study of finishing techniques for age-hardened Inconel 718 alloy

    Journal of Materials Research and Technology, Vol. 15, pp. 5623-5634

  4. Experimental and FEM analysis of dry and cryogenic turning of hardened steel 100Cr6 using CBN Wiper tools

    Procedia CIRP

  5. Experimental evaluation and surface integrity analysis of cryogenic coolants approaches in the cylindrical plunge grinding

    Scientific Reports, Vol. 11, Núm. 1

2020

  1. Comparison between cryogenic coolants effect on tool wear and surface integrity in finishing turning of Inconel 718

    Journal of Materials Processing Technology, Vol. 285

  2. Sensitivity analysis of the input parameters of a physical based ductile failure model of Ti-6Al-4V for the prediction of surface integrity

    Procedia CIRP

  3. Surface integrity when machining Inconel 718 using conventional lubrication and carbon dioxide coolant

    Procedia Manufacturing

2019

  1. 1st Esaform mobility grant: Modeling of post machining distortions in thin walls applied to aluminum parts compared to experimental results

    AIP Conference Proceedings

  2. Methodology to establish a hybrid model for prediction of cutting forces and chip thickness in orthogonal cutting condition close to broaching

    International Journal of Advanced Manufacturing Technology, Vol. 101, Núm. 5-8, pp. 1357-1374

2018

  1. Effect of cutting speed on the surface integrity of face milled 7050-T7451 aluminium workpieces

    Procedia CIRP