Publications (17) Publications de Nuria Herrero Dorca

2024

  1. Multiphysics modeling and experimental validation of heat and mass transfer for the vacuum induction melting process

    Applied Thermal Engineering, Vol. 243

2023

  1. Effect of the crucible composition on the Inconel 718 vacuum induction melting process efficiency

    Journal of Materials Research and Technology, Vol. 23, pp. 3351-3361

2019

  1. Fatigue life estimation of cast aluminium alloys considering the effect of porosity on initiation and propagation phases

    International Journal of Fatigue, Vol. 125, pp. 468-478

  2. Induction skull melting of Ti-6Al-4V: Process control and efficiency optimization

    Metals, Vol. 9, Núm. 5

  3. Influencia del acabado superficial y la porosidad en el comportamiento a fatiga de la aleación A356

    Anales de mecánica de la fractura, Núm. 36, pp. 581-585

2018

  1. Effect of single and double solution treatment on second phase dissolution of an Al-8.5Si-1.5Cu-0.4Mg alloy with different initial cooling rates

    73rd World Foundry Congress "Creative Foundry", WFC 2018 - Proceedings

  2. Influence of Surface Finish and Porosity on the Fatigue behaviour of A356 Aluminium Casting Alloy

    MATEC Web of Conferences

  3. Preliminar mechanical properties and microstructures obtained after casting a modified Al-Zn-Mg wrought alloy

    73rd World Foundry Congress "Creative Foundry", WFC 2018 - Proceedings

  4. Press hardening of alternative materials: conventional high- strength steels

    International Journal of Material Forming, Vol. 11, Núm. 5, pp. 663-670

2017

  1. α-Case formation in Ti-6Al-4V investment casting using ZrSiO4 and Al2O3 moulds

    Journal of Materials Processing Technology, Vol. 243, pp. 75-81

2016

  1. Desarrollo del proceso tixo forjado lateral para la fabricación de estructuras híbridas acero-aluminio

    Revista DYNA, Vol. 91, Núm. 4, pp. 438-444

2015

  1. Tailor tempering and hot-spotting of press hardened boron steels

    Key Engineering Materials

2014

  1. Influence of tooling material and temperature on the final properties of tailor tempered boron steels

    Key Engineering Materials

  2. The calibration of high energy-rate impact forging hammers by the copper-column upsetting method and high speed camera measurements

    Key Engineering Materials

  3. Ti-6Al-4V turbine blade investment casting melted in cold crucible induction melting

    71st World Foundry Congress: Advanced Sustainable Foundry, WFC 2014

2011

  1. Analysis of different inhibitors for magnesium investment casting

    IOP Conference Series: Materials Science and Engineering

2008

  1. Hidroconformado de chapa a temperaturas medias

    IMHE: Información de máquinas-herramienta, equipos y accesorios, Núm. 352, pp. 10-16