Publicaciones en las que colabora con Joseba Mendiguren Olaeta (62)

2022

  1. Thematic Session 04: Metal Forming – Formability Characterization,Damage and Ductile Fracture

    Congress on Numerical Methods in Engineering CMN 2022 (2022. Las Palmas de Gran Canaria)

2021

  1. Contact pressure and sliding velocity ranges in sheet metal forming simulations

    ESAFORM 2021 - 24th International Conference on Material Forming

  2. Contact pressure, sliding velocity and viscosity dependent friction behavior of lubricants used in tube hydroforming processes

    ESAFORM 2021 - 24th International Conference on Material Forming

  3. New drawbead tester and numerical analysis of drawbead closure force

    International Journal of Advanced Manufacturing Technology, Vol. 116, Núm. 5-6, pp. 1855-1869

  4. Simulation of Cold Forging Processes Using a Mixed Isotropic-Kinematik Hardening Model

    Minerals, Metals and Materials Series

  5. The interaction between the sheet/tool surface texture and the friction/galling behaviour on aluminium deep drawing operations

    Metals, Vol. 11, Núm. 6

2020

  1. Aluminum springback reduction by post-forming electric pulses

    Procedia Manufacturing

  2. Experimental and numerical simulation investigation on deep drawing process of inconel 718 with and without intermediate annealing thermal treatments

    Applied Sciences (Switzerland), Vol. 10, Núm. 2

  3. Strain rate effect on the fracture behavior of the AA5754 aluminum alloy

    Procedia Manufacturing

  4. The effect of material surface roughness in aluminum forming

    Procedia Manufacturing

  5. The influence of the kinematic hardening on the FEM simulation of tension levelling process

    Procedia Manufacturing

2019

  1. Numerical prediction of force and energy consumption in roll forming processes

    AIP Conference Proceedings

  2. Perfilado 4.0: ayuda a la puesta a punto y aseguramiento de la calidad en procesos de perfilado

    22 CMH Congreso de fabricación avanzada y máquinas-herramienta

2018

  1. Drawbead uplift force analytical model for deep drawing operations

    Journal of Physics: Conference Series

  2. Hardening prediction of diverse materials using the Digital Image Correlation technique

    Mechanics of Materials, Vol. 124, pp. 71-79

  3. Improving the prediction of the final part geometry in high strength steels U drawing by means of advanced material and friction models

    AIP Conference Proceedings

  4. Influence of roll levelling on material properties and postforming springback

    AIP Conference Proceedings

  5. On the accurate characterization of the drawbead up-lift forces

    IOP Conference Series: Materials Science and Engineering

  6. On the plastic flow rule formulation in anisotropic yielding aluminium alloys

    International Journal of Advanced Manufacturing Technology, Vol. 99, Núm. 1-4, pp. 255-274

  7. Press hardening of alternative materials: conventional high- strength steels

    International Journal of Material Forming, Vol. 11, Núm. 5, pp. 663-670