Publications by the researcher in collaboration with Iosu Tena Merino (22)

2025

  1. Lateral crashworthiness of UV-pultruded hat profiles with 3D printed bio-inspired inserts

    Polymer Composites

2024

  1. Impact and notched strength of multiaxially reinforced out of die UV cured pultruded profiles

    Polymer Composites, Vol. 45, Núm. 5, pp. 4348-4358

2023

  1. Paneles fabricados mediante curado UV de prepregs fuera de autoclave reforzados con perfiles de pultrusión UV

    Comunicaciones Congreso Nacional de Materiales Compuestos (MATCOMP21 y MATCOMP23). Sevilla, 21-23 Junio, 2022

2022

  1. Impact performance of out of die UV cured pultruded profiles for vessel structures

    ECCM 2022 - Proceedings of the 20th European Conference on Composite Materials: Composites Meet Sustainability

2020

  1. An analytical model of through-thickness photopolymerisation of composites: Ultraviolet light transmission and curing kinetics

    Composites Part B: Engineering, Vol. 191

  2. Analysis of axial crushing behaviour of unsaturated polyester and vinyl ester composites manufactured by out of die ultraviolet cured pultrusion

    ECCM 2018 - 18th European Conference on Composite Materials

  3. Effect of alumina tri-hydrate filler on the mechanical and optical properties of flame-retardant ultraviolet cured vinyl ester composites

    ECCM 2018 - 18th European Conference on Composite Materials

2019

  1. Design and characterisation of cellular composite structures for automotive crash-boxes manufactured by out of die ultraviolet cured pultrusion

    Composites Part B: Engineering, Vol. 160, pp. 217-224

  2. Diseño de núcleos fabricados mediante impresión 3D para mejorar el comportamiento a compresión radial de tubos fabricados por pultrusión

    Revista de Materiales Compuestos

  3. Monitoring the evolution of stiffness during ultraviolet curing of a vinyl ester resin with quasi-normal air-coupled ultrasonic spectroscopy

    Polymer Testing, Vol. 80

2018

  1. Effect of the manufacturing process on the energy absorption capability of GFRP crush structures

    Composite Structures, Vol. 187, pp. 316-324

  2. Effect of ultraviolet curing kinetics on the mechanical properties of out of die pultruded vinyl ester composites

    Composites Part A: Applied Science and Manufacturing, Vol. 109, pp. 280-289

2016

  1. Characterisation of ultraviolet curing resins for 3D pultrusion

    ECCM 2016 - Proceeding of the 17th European Conference on Composite Materials

  2. Effect of fibre volume fraction on energy absorption capabilities of E-glass/polyester automotive crash structures

    Composites Part B: Engineering, Vol. 85, pp. 1-7

  3. Out of die ultraviolet pultrusion process set-up: Limitations of photo-differential scanning calorimetry analysis

    ECCM 2016 - Proceeding of the 17th European Conference on Composite Materials

  4. Pultrusiozko profil kurboak automoziorako

    III. Materialen Zientzia eta Teknologia Kongresua

  5. The effect of process parameters on ultraviolet cured out of die bent pultrusion process

    Composites Part B: Engineering, Vol. 89, pp. 9-17

2015

  1. Out of die ultraviolet cured pultrusion for automotive crash structures

    Composites Part B: Engineering, Vol. 79, pp. 209-216

2014

  1. Selection of led or conventional UV lamp based on the composite thickness

    16th European Conference on Composite Materials, ECCM 2014

  2. Uv ontzea karakterizatzeko teknika: Erretxinaren eta konpositearen arteko desberdintasuna

    II Materialen Zientzia eta Teknologia Kongresua