Publications dans lesquelles il/elle collabore avec German Castillo López (13)

2022

  1. Fibre–Wood Laminate Biocomposites: Seawater Immersion Effects on Flexural and Low Energy Impact Properties

    Polymers, Vol. 14, Núm. 19

2016

  1. Dynamic 4 ENF test for a strain rate dependent mode II interlaminar fracture toughness characterization of unidirectional carbon fibre epoxy composites

    Polymer Testing, Vol. 55, pp. 212-218

2015

  1. Loading rate dependency on mode I interlaminar fracture toughness of unidirectional and woven carbon fibre epoxy composites

    Composite Structures, Vol. 121, pp. 75-82

2014

  1. Impact velocity effect on the delamination of woven carbon-epoxy plates subjected to low-velocity equienergetic impact loads

    Composites Science and Technology, Vol. 94, pp. 48-53

2011

  1. Conception of crash tests for composite tubular structures

    ICCM International Conferences on Composite Materials

2009

  1. Effect of impact-induced strain on the stress-induced martensitic transformation of superelastic NiTi shape-memory alloy wires

    Journal of Materials Engineering and Performance, Vol. 18, Núm. 5-6, pp. 600-602

  2. Instrumented tensile-impact test method for shape memory alloy wires

    Materials Science and Engineering A, Vol. 524, Núm. 1-2, pp. 108-111

  3. Low-energy tensile-impact behavior of superelastic NiTi shape memory alloy wires

    Mechanics of Materials, Vol. 41, Núm. 9, pp. 1050-1058

  4. Phase transformation fronts propagation during the stress induced martensitic transformation at impact strain rates in NiTi shape memory alloy wires

    ESOMAT 2009 - 8th European Symposium on Martensitic Transformations

  5. Setting up of pull-out test at impact strain rates for SMA wire/pCBT adaptive composite

    ICCM International Conferences on Composite Materials

2008

  1. Constitutive model taking into account the strain rate for uniaxial NiTi shape memory alloy under low velocity impact conditions

    Smart Materials and Structures, Vol. 17, Núm. 6

  2. Iso-strain rate material behaviour curves applied to the finite element impact simulation

    Polymer Testing, Vol. 27, Núm. 1, pp. 84-92

2006

  1. Failure of multimaterial fusion bonding interface generated during over-injection molding/thermoforming hybrid process

    Journal of Applied Polymer Science, Vol. 102, Núm. 1, pp. 261-265