Publicaciones en las que colabora con Ainara Garay Araico (9)

2018

  1. New calibration method to measure rake face temperature of the tool during dry orthogonal cutting using thermography

    Applied Thermal Engineering, Vol. 137, pp. 74-82

  2. Ti6Al4V metal cutting chip formation experiments and modelling over a wide range of cutting speeds

    Journal of Materials Processing Technology, Vol. 255, pp. 898-913

2016

  1. Heat transferred to the workpiece based on temperature measurements by IR technique in dry and lubricated drilling of Inconel 718

    Applied Thermal Engineering, Vol. 104, pp. 309-318

2015

  1. Finding Correlations between Tool Life and Fundamental Dry Cutting Tests in Finishing Turning of Steel

    Procedia Engineering

  2. Uncertainty of temperature measurements in dry orthogonal cutting of titanium alloys

    Infrared Physics and Technology, Vol. 71, pp. 208-216

2014

  1. Study and improvement of surgical drill bit geometry for implant site preparation

    International Journal of Advanced Manufacturing Technology, Vol. 74, Núm. 5-8, pp. 615-627

2013

  1. Effects of rotational speed, feed rate and tool type on temperatures and cutting forces when drilling bovine cortical bone

    Machining Science and Technology, Vol. 17, Núm. 4, pp. 611-636

2012

  1. Effects of rotational speed and feed rate on temperature rise, feed force and cutting torque when drilling bovine cortical bone

    AIP Conference Proceedings

  2. Influence of cutting conditions on temperature rise, feed force and cutting torque when drilling bone

    Advanced Materials Research