Publicaciones en las que colabora con Mikel Iragi Sampedro (15)
2023
-
Design, manufacturing and testing of 3D printed variable-stiffness laminates for improved open-hole tensile behaviour
Additive Manufacturing, Vol. 63
2022
-
Compresión axial de tubos auxéticos fabricados mediante impresión 3D de poliamida reforzada con fibra corta de carbono
Revista de Materiales Compuestos
-
Efectos de la temperatura en la microestructura y en la respuesta mecánica de polímeros impresos 3D reforzados con fibra de carbono
Revista de Materiales Compuestos
-
Interlaminar fracture toughness of 3D printed continuous carbon fibre- reinforced polyamide
Revista de Materiales Compuestos
2021
-
Comportamiento a flexión de estructuras sándwich obtenidas mediante impresión 3D con fibra continua
Revista de Materiales Compuestos
-
Quasi-static and dynamic crush behaviour of 3D printed thin-walled profiles reinforced with continuous carbon and glass fibres
Composites Part B: Engineering, Vol. 217
-
The effect of cross-section geometry on crushing behaviour of 3D printed continuous carbon fibre reinforced polyamide profiles
Composite Structures, Vol. 274
2020
-
An approach to analyse the factors behind the micromechanical response of 3D-printed composites
Composites Part B: Engineering, Vol. 186
-
Characterization of elastic and resistance behaviours of 3D printed continuous carbon fibre reinforced thermoplastics
ECCM 2018 - 18th European Conference on Composite Materials
2019
-
Diseño de núcleos fabricados mediante impresión 3D para mejorar el comportamiento a compresión radial de tubos fabricados por pultrusión
Revista de Materiales Compuestos
-
Enhanced energy absorption properties in 3D printed polymer matrix composite
ECCM 2018 - 18th European Conference on Composite Materials
-
Over-3D printing of continuous carbon fibre composites on organo-sheet substrates
AIP Conference Proceedings
-
Ply and interlaminar behaviours of 3D printed continuous carbon fibre-reinforced thermoplastic laminates; effects of processing conditions and microstructure
Additive Manufacturing, Vol. 30
2018
-
Moldes prototipo de RTM fabricados mediante impresión 3D
Revista de Materiales Compuestos
2011
-
Fatigue behaviour of carbon fibre/epoxy composite manufactured by vacuum assisted compression resin transfer moulding
ICCM International Conferences on Composite Materials