Publicaciones (67) Publicaciones en las que ha participado algún/a investigador/a

2024

  1. Machine learning model of acoustic signatures: Towards digitalised thermal spray manufacturing

    Mechanical Systems and Signal Processing, Vol. 208, pp. 111030

2023

  1. Sensitivity Analysis of the Design Parameters of Permanent Magnet Synchronous Motors for Vibration Reduction

    Applied Sciences (Switzerland), Vol. 13, Núm. 9

2022

  1. Damping characterisation of an elevator rope

    International Conference on Noise and Vibration Engineering (ISMA 22)

  2. Fast and Accurate Vibration Response Calculation Procedure for Permanent Magnet Synchronous Machines

    2022 International Conference on Electrical Machines, ICEM 2022

  3. Influence of Manufacturing Tolerances and Eccentricities on the Electromotive Force in Permanent Magnet Synchronous Motors

    2022 International Conference on Electrical Machines, ICEM 2022

  4. Influence of Manufacturing Tolerances and Eccentricities on the Unbalanced Magnetic Pull in Permanent Magnet Synchronous Motors

    IEEE Transactions on Industry Applications, Vol. 58, Núm. 3, pp. 3497-3510

  5. MONDRAGON ZTIM HUB: tematic challenges to promote STEM vocations among students

    SEFI 2022 - 50th Annual Conference of the European Society for Engineering Education, Proceedings

  6. Mondragon ZTIM-HUB: the collaborative network for the development of STEM vocations

    EDULEARN proceedings

  7. Noise attenuation prediction and analysis in rectangular lined ducts

    International Conference on Noise and Vibration Engineering (ISMA 22)

2021

  1. A Novel Methodology for the Characterization of Cutting Conditions in Turning Processes Using Machine Learning Models and Acoustic Emission Signals

    16th International Conference on Soft Computing Models in Industrial and Environmental Applications (SOCO 2021)

  2. Analytical model to calculate radial forces in permanent‐magnet synchronous machines

    Applied Sciences (Switzerland), Vol. 11, Núm. 22

  3. Integral Design and Manufacturing Methodology of a Reduced-Scale Servo Press

    IEEE/ASME Transactions on Mechatronics, Vol. 26, Núm. 5, pp. 2418-2428

  4. Optimum slot and pole design for vibration reduction in permanent magnet synchronous motors

    Applied Sciences (Switzerland), Vol. 11, Núm. 11

2020

  1. A study of the effects of the magnetization tolerance in the manufacturing process on permanent magnet synchronous machines

    2020 10th International Electric Drives Production Conference, EDPC 2020 - Proceedings

  2. Analysis of the dynamic characterisation and behaviour of an elevator rope

    Proceedings of ISMA 2020 - International Conference on Noise and Vibration Engineering and USD 2020 - International Conference on Uncertainty in Structural Dynamics

  3. Analysis of the noise attenuation in ducts by means of rigid perforated panels

    Proceedings of ISMA 2020 - International Conference on Noise and Vibration Engineering and USD 2020 - International Conference on Uncertainty in Structural Dynamics

  4. Comfort improvement of an elevator car by viscoelastic sandwich panels

    Proceedings of ISMA 2020 - International Conference on Noise and Vibration Engineering and USD 2020 - International Conference on Uncertainty in Structural Dynamics

  5. Influence of manufacturing tolerances and eccentricities on the unbalanced magnetic pull in permanent magnet synchronous motors

    Proceedings - 2020 International Conference on Electrical Machines, ICEM 2020

  6. Real-Time Servo Press Force Estimation Based on Dual Particle Filter

    IEEE Transactions on Industrial Electronics, Vol. 67, Núm. 5, pp. 4088-4097

  7. Soft sensing force measurement approach in sheet metal forming facilities

    IOP Conference Series: Materials Science and Engineering