1EPS Tecnología de Plásticos y Compuestos
COMPOSITES
German
Castillo López
Publicacions en què col·labora amb German Castillo López (15)
2022
-
Fibre–Wood Laminate Biocomposites: Seawater Immersion Effects on Flexural and Low Energy Impact Properties
Polymers, Vol. 14, Núm. 19
2018
-
Influence of the deformation rate on the delamination of laminated composite materials
Key Engineering Materials
2016
-
Dynamic 4 ENF test for a strain rate dependent mode II interlaminar fracture toughness characterization of unidirectional carbon fibre epoxy composites
Polymer Testing, Vol. 55, pp. 212-218
2015
-
Loading rate dependency on mode I interlaminar fracture toughness of unidirectional and woven carbon fibre epoxy composites
Composite Structures, Vol. 121, pp. 75-82
2014
-
Impact velocity effect on the delamination of woven carbon-epoxy plates subjected to low-velocity equienergetic impact loads
Composites Science and Technology, Vol. 94, pp. 48-53
2012
-
Effects of the velocity in the delamination of carbon-epoxy plates subjected to low-velocity impact load
ECCM 2012 - Composites at Venice, Proceedings of the 15th European Conference on Composite Materials
2011
-
Conception of crash tests for composite tubular structures
ICCM International Conferences on Composite Materials
2009
-
Effect of impact-induced strain on the stress-induced martensitic transformation of superelastic NiTi shape-memory alloy wires
Journal of Materials Engineering and Performance, Vol. 18, Núm. 5-6, pp. 600-602
-
Instrumented tensile-impact test method for shape memory alloy wires
Materials Science and Engineering A, Vol. 524, Núm. 1-2, pp. 108-111
-
Low-energy tensile-impact behavior of superelastic NiTi shape memory alloy wires
Mechanics of Materials, Vol. 41, Núm. 9, pp. 1050-1058
-
Phase transformation fronts propagation during the stress induced martensitic transformation at impact strain rates in NiTi shape memory alloy wires
ESOMAT 2009 - 8th European Symposium on Martensitic Transformations
-
Setting up of pull-out test at impact strain rates for SMA wire/pCBT adaptive composite
ICCM International Conferences on Composite Materials
2008
-
Constitutive model taking into account the strain rate for uniaxial NiTi shape memory alloy under low velocity impact conditions
Smart Materials and Structures, Vol. 17, Núm. 6
-
Iso-strain rate material behaviour curves applied to the finite element impact simulation
Polymer Testing, Vol. 27, Núm. 1, pp. 84-92
2006
-
Failure of multimaterial fusion bonding interface generated during over-injection molding/thermoforming hybrid process
Journal of Applied Polymer Science, Vol. 102, Núm. 1, pp. 261-265