Publicaciones (237) Publicaciones en las que ha participado algún/a investigador/a

2024

  1. Gaussian process regression-driven deep drawing blank design method

    International Journal of Mechanical Sciences, Vol. 265

  2. High-temperature tribological performance of functionally graded Stellite 6/WC metal matrix composite coatings manufactured by laser-directed energy deposition

    Friction, Vol. 12, Núm. 3, pp. 522-538

  3. Impact behaviour of bio-inspired sandwich panels integrally manufactured from 3D printed continuous carbon fibre reinforced polyamide

    Composites Science and Technology, Vol. 250

  4. Low-velocity impact performance of integrally-3D printed continuous carbon fibre composite sandwich panels

    Materials Letters, Vol. 354

  5. Multiphysics modeling and experimental validation of heat and mass transfer for the vacuum induction melting process

    Applied Thermal Engineering, Vol. 243

  6. Sensitivity analysis of near solidus forming (NSF) process with digital twin using Taguchi approach

    Advances in Manufacturing

2023

  1. A Preliminary Study on the Quality of Joining AISI 316 and AISI 3415 Steel by the Near Solidus Forming Process

    Metals, Vol. 13, Núm. 7

  2. A comprehensive experimental investigation of the rate-dependent interlaminar delamination behaviour of CFRP composites

    Composites Part B: Engineering, Vol. 261

  3. A mechanistic-finite element hybrid approach to modelling cutting forces when drilling GFRP-AISI 304 stacks

    CIRP Annals, Vol. 72, Núm. 1, pp. 69-72

  4. An automatic thermo-mechanical testing apparatus for metal forming applications

    International Journal of Impact Engineering, Vol. 182

  5. Analysis of the Mechanical and Microstructural Fluctuations of High-Strength Steels and Their Effect on Bending Angle

    Metals, Vol. 13, Núm. 9

  6. Anisotropic plasticity and fracture modelling of cold rolled AA5754

    Engineering Fracture Mechanics, Vol. 289

  7. Design and characterization of a novel lightweight multicomponent alloy Al58Zn28Mg6Si8

    Journal of Materials Research and Technology, Vol. 27, pp. 3751-3760

  8. Design of a new simulative tribotest for warm forming applications having high contact pressure and surface enlargement

    Materials Research Proceedings

  9. Digital twin development for the sensitivity analysis of near solidus forming process

    Materials Research Proceedings

  10. Dynamic fracture initiation of high-strength metals

    Revista española de mecánica de la fractura, Núm. 5, pp. 139-144

  11. Effect of near beta-transus forging parameters on the mechanical and microstructural properties of Ti-6Al-4V – Application to hammer forging

    Materials Research Proceedings

  12. Effect of the crucible composition on the Inconel 718 vacuum induction melting process efficiency

    Journal of Materials Research and Technology, Vol. 23, pp. 3351-3361

  13. Effects of Different Si Content and Thermal Stories on the Secondary Phase Formation, Hot Ductility, and Stress Rupture Properties of Alloy 718 Investment Castings

    Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, Vol. 54, Núm. 7, pp. 2670-2688

  14. Modelling the Non-linear fibre and matrix dominated compressive behaviour in unidirectional Fibre-reinforced composites

    Composite Structures, Vol. 304