Residual Stress Pattern Prediction in Spray Transfer Multipass Welding by Means of Numerical Simulation

  1. Esnaola, Jon Ander 1
  2. Ulacia, Ibai 1
  3. Lopez-Jauregi, Arkaitz 1
  4. Ugarte, Done 1
  1. 1 Structural Mechanics and Design, Engineering Faculty, Mondragon Unibertsitatea, Mondragón, Spain
Libro:
Residual Stress Analysis on Welded Joints by Means of Numerical Simulation and Experiments

ISBN: 9781789231069,  9781789231076

Ano de publicación: 2018

Tipo: Capítulo de libro

DOI: 10.5772/INTECHOPEN.72134 GOOGLE SCHOLAR lock_openAcceso aberto editor

Resumo

One of the main problems of gas metal arc welding (GMAW) process is the generation of residual stresses (RS), which has a direct impact on the mechanical performance of welded components. Nevertheless, RS pattern prediction is complex and requires the simulation of the welding process. Consequently, most of the currently used dimensioning approaches do not consider RS, leading to design oversized structures. This fact is especially relevant in big structures since it generates high material, manufacturing and product transportation costs. Nowadays, there are different numerical methods to predict the RS generated in GMAW process, being Goldak’s method one of the most widely used model. However, the use of these methods during the design process is limited, as they require experimentally defining many parameters. Alternatively, in this chapter, a new methodology to define the heat source energy based on the spray welding physics is exposed. The experimental validation of the methodology conducted for a multipass butt weld case shows good agreement in both the temperature pattern (9.16% deviation) and the RS pattern (42 MPa deviation). Finally, the proposed methodology is extended to analyse the influence of the thickness and the number of passes in the RS pattern of thick T-joint welds.

Referencias bibliográficas

  • Naidu DS, Moore KL, Ozcelik S. Modelling Sensing and Control of Gas Metal Arc Welding. Kilington: Elsevier Science Ltd.; 2003
  • Gery D, Long H, Maropoulos P. Effects of welding speed, energy input and heat source distribution on temperature variations in butt joint welding. Journal of Materials Processing Technology. 2005;167(2):393-401
  • Mousavi M, Haeri M. Estimation and control of droplet size and frequency in projected spray mode of a gas metal arc welding (GMAW) process. ISAT. 2001;50(3):409-418
  • Murray PE. Selecting parameters for GMAW using dimensional analysis. Welding Journal. 2002;81(7):125-131
  • Maddox SJ. Fatigue strength of welded structures. Woodhead publishing. 1991
  • Sattari-FAr I, Farahani MR. Effect of the weld groove shape and pass number on residual stresses in butt welded pipes. International Journal of Pressure Vessels and Piping. 2009;86(11):723-731
  • Brickstad B, Josefson BLA. Parametric study of residual stresses in multi-pass butt welded stainless steel pipes. International Journal of Pressure Vessels and Piping. 1998;75(1):11-25
  • Keivani R, Jahazi M, Pham T, Khodabandeh AR, Afshar MR. Prediction of residual stresses and distortion during multisequence welding of large size structures using FEM. International Journal of Advanced Manufacturing Technology. 1-11
  • Asadi M, Goldak J, Nielsen J, Zhou J, Tchernov S, Downey D. Analysis of predicted residual stress in a weld and comparison with experimental data using regression model. International Journal of Mechanics and Materials in Design. 2009;5:353-364
  • Deng D, Murakawa H. Numerical simulation of temperature field and residual stress in multi-pass welds in stainless steel pipe and comparison with experimental measurements. Computational Materials Science. 2006;37(3):269-277
  • Turski M, Francis JA, Hurrell PR, Bate SK, Hiller S, Withers PJ. Effects of stop-star features on residual stresses in a multipass austenitic stainless steel weld. International Journal of Pressure Vessels and Piping. 2012;89:9-18
  • Philipenko A. Computer simulation of residual stress and distortion of thick plates in multi-electrode submerged arc welding. Theri mitigation techniques. PhD thesis, Norwegian University of Science and Technology. 2001
  • Radaj D. Heat Effects of Welding. Berlin: Springer; 1992
  • Chang P-H, Teng T-L. Numerical and experimental investigations on the residual stresses of the butt-welded joints. Computational Materials Science. 2004;29:511-522
  • Messler RW. Principles of Welding Processes, Physics, Chemistry, and Metallurgy. Troy, NY: John Wiley & Sons; 2008
  • Paradowska A, Price JW, Ibrahim R, Finlayson T. A neutron diffraction study of residual stress due to welding. Journal of Materials Processing Technology. 2005;164:1099-1105
  • Navas VG. Optimización de procesos de mecanizado mediante control de tensiones residuales y otros parámetros de integridad superficial. PhD thesis, Campus Tecnológico de la Universidad de Navarra, Spain. 2006
  • Sonsino CM. Multiaxial fatigue assessment of welded joints-recommendations for design codes. International Journal of Fatigue. 2009;31(1):173-187
  • Radaj D, Sonsino CM, Fricke W. Fatigue assessment of welded joints by local approaches. Woodhead publishing. 2006
  • Lassen T, Recho N. Fatigue life analysis of welded structures. London: Wiley-ISTE; 2006
  • Lopez-Jauregi A, Esnaola JA, Ugarte D, Torca I, Larranaga J. Procedure to predict residual stress pattern in spray transfer multipass welding. International Journal of Advanced Manufacturing Technology. 2014;76:2117-2129
  • Hansen JL. Numerical modelling of welding induced stresses. PhD thesis, Technical University of Denmark. 2003
  • Rosenthal D. Mathematical theory of heat distribution during welding and cutting. Welding Journal. 1941;20(5):220-234
  • Pavelic V, Tanbakuchi R, Uyehara OA, Myers PS. Experimental and computed temperature histories in gas tungsten arc welding of thin plates. Welding Journal. 1969;48(7):295
  • Goldak J, Chakravati A, Bibby M. A new finite element model for welding heat sources. Metallurgical Transactions B. 1984;15(2):299-305
  • Chen B-Q. Hashemezadeh Guedes Soares C. Numerical and experimental studies on temperature and distortion patterns in butt welded plates. International Journal of Advanced Manufacturing Technology. 2014;72:1121-1131
  • Zhu F, Xu C, Zeng L. Coupled finite element analysis of MIG welding assembly on auto-body high-strength steel panel and door hinge. International Journal of Advanced Manufacturing Technologies. 2010;51:551-559
  • Lidam RN, Manurung YHP, Haruman E. Angular distortion analysis of the multipass welding process on combined joint types using thermo-elastic-plastic FEM with experimental validation. International Journal of Advanced Manufacturing Technologies. 2013;69:2373-2386
  • Price J, Paradowska A, Joshi S, Finlayson T. Residual stresses measurements by neutron diffraction and theoretical estimation in a single weld bead. International Journal of Pressure Vessels and Piping. 2006;83:381-387
  • Barsoum Z, Barsoum I. Residual stress effects on fatigue life of welded structures using LEFM. Engineering Failure Analysis. 2009;16(1):449-846
  • Pichot F, Danis M, Lacoste E, Danis Y. Numerical definition of an equivalent GTAW heat sources. Journal of Materials Processing Technologies. 2013;213(7):1241-1248
  • Wahab MA, Painter MJ. Numerical model of gas meatal arc weld using experimentally determined weld pool shapes as the representation of the welding heat source. International Journal of Pressure Vessels and Piping. 1997;73(2):153-159
  • Barsoum Z. Residual stress prediction and relaxation in welded tubular joint. Weld World. 2007;51(1-2):23-30
  • Hu J, Tsai HL. Heat and mass transfer in gas metal arc welding. Part I: The arc. International Journal of Heat and Mass Transfer. 2007;50(5):833-846
  • Hu J, Tsai HL. Heat and mass transfer in gas metal arc welding. Part II: The metal. International Journal of Heat and Mass Transfer. 2007;50(5):808-820
  • Xu G, Hu J, Tsai HL. Three-dimensional modeling of ar plasma and metal transfer in gas metal arc welding. International Journal of Heat and Mass Transfer. 2009;52(7):1709-1724
  • Norrish J. Advanced welding processes. Institute of. Physics. 1992
  • Lesnewich A. Commentary on GMAW. Parameter selection paper. 2003
  • Palani PK, Murugan N. Modeling and simulation of wire feed rate for steady current and pulsed current gas metal arc welding using 317L flux cored wire. International Journal of Advanced Manufacturing Technologies. 2007;34:1111-1119
  • Murray PE. Selecting parameters for GMAW using dimensional analysis. Welding Journal. 125-131
  • Modenesi PJ, Reis RI. A model for melting rate phenomena in GMA welding. Journal of Materials Processing Technologies. 189:199-205
  • Palain PK, Murugan N. Selection parameters of pulsed current gas metal ar welding. Journal of Materials Processing Technologies. 2006;172:1-10
  • Zamiri-Akhlaghi F. Welding simulation and fatigue assessment of tubular K-joint in high-strength steel. PhD thesis, École Polytechnique Fédérale de Lausanne, Switzerland. 2014
  • Teng TL, Fung CP, Chang PH. Effect of weld geometry and residual stresses on fatigue in butt-welded joints. International Journal of Pressure Vessels and Piping. 2002;79:476-492
  • Payares-Asprino MC, Katsumoto H, Liu S. Effect of martensite start and finish temperatures on residual stress development in structural steel welds. Welding Journal. 2008;87:279-289
  • Deng D. FEM prediction of welding residual stress and distortion in carbon steel considering phase transformation effects. Materials and Design. 30(2):359-366
  • APTA (Asocación para la Promoción Técnica del Acero) [Internet]. Available from: http://apta.com.es/pdf/aceros.pdf [Accessed: 11-06-2014]
  • Electric L. GMAW welding guide [Internet]. Available from: hhtp://www.oemeyer.com/Media/Defautl/Industrial/technical/MIG%20welding%20guide-lincoln.pdf [Accessed: 11-06-2014]
  • Ranjabamodeh E, Pouranavari M, Fischer A. Influence of welding parameters on residual stresses in dissimilar HSLA steels welds. Association of Metallurgical Engineers of Serbia. 2013
  • Mills KC. Recommended Values of Thermophysical Properties for Selected Commercial Alloys. Cambridge, England: Woodhead Publishing; 2002
  • Thermal conductivity for carbon steel AISI 1010 [Internet]. Available from: http://www.egunda.com/materials/alloys/carbon_steels/show_carbon.cfm?ID=AISI_1010&show_prop=tc&Page_Title=Carbon%20Steel%20AISI%201010 [Accessed: 11-06-2014]
  • Pitz M. Merklein M. FE simulation laser assisted bending. Proceedings of the 11th International Conference: Sheet Metal. 745-752
  • Tensile properties at high temperature for S275 steel [Internet]. Available from: http://www.thyssenfrance.com/fich_tech_en.asp?product_id=17930 [Accessed: 11-06-2014]
  • EN 1993-1-2: Eurocode 3: Design of Steel Structures-Part 1-2: General Rules-Structural Fire Design. 2005
  • Safety data sheet for Stargon 82 [Internet]. Available from: http://www.cialgas.com/wp-content/uplads/2012/09/STARGON-82.pdf [Accessed: 11-06-2014]
  • Larrañaga J. Geometrical accuracy improvement in flexible roll forming process by means of local heating. PhD thesis, Mondragon Unibertsitatea. 2011
  • Withers PJ, Bhadeshia HKDH. Residual stress. Part 1-measurement techniques. Materials Science and Technology. 2001;17(4):355-365
  • Lopez-Jauregi A, Esnaola JA, Ulacia I, Urrutibeaskoa I, Madariaga A. Fatigue analysis of multipass welded joints considering residual stresses. International Journal of Fatigue. 2015;79:75-85