Efecto de un polímero natural biodegradable en las propiedades de morteros de cal en estado endurecido

  1. Izaguirre Altuna, Alberto
  2. Lanas, J.
  3. Álvarez, J.I.
Revista:
Materiales de construcción

ISSN: 0465-2746

Ano de publicación: 2011

Volume: 61

Número: 302

Páxinas: 257-274

Tipo: Artigo

DOI: 10.3989/MC.2010.56009 DIALNET GOOGLE SCHOLAR lock_openAcceso aberto editor

Outras publicacións en: Materiales de construcción

Resumo

Como alternativa a los materiales con base cemento y a plastificantes obtenidos por vía química, se estudió el efecto de un almidón comercial incorporado a morteros de cal aérea. Se ensayaron dosificaciones diferentes para analizar su influencia sobre las propiedades del material. En los morteros se determinaron densidad, retracción, absorción de agua por capilaridad, permeabilidad, resistencias mecánicas, porosidad, distribución de tamaños de poro y durabilidad frente a ciclos de hielo-deshielo. El almidón actuó como espesante hasta la dosis de 0,30%, pero cambió al añadirlo en la dosis más alta (0,50%): en este caso, se comportó como un plastificante, dispersando la cal a través de la mezcla en fresco, dando lugar a un material más trabajable. Como resultado, en la dosis 0,50%, la matriz del mortero endurecido presentó gran coherencia, por su mayor densidad y menor porosidad, lo que implicó una menor capilaridad y permeabilidad, mejores resistencias mecánicas y durabilidad.

Referencias bibliográficas

  • Sébaïbi, Y., Dheilly, R. M., Quéneudec, M.: “A study of the viscosity of lime-cement paste: influence of the physico-chemical characteristics of lime”, Constr. Build. Mater., Vol. 18 (2004), pp. 653-660. doi:10.1016/j.conbuildmat.2004.04.028
  • Lanas, J., Alvarez, J. I.: “Masonry repair lime-based mortars: Factors affecting the mechanical behaviour”, Cem. Concr. Res., Vol. 33 (2003), pp. 1867-1876. doi:10.1016/S0008-8846(03)00210-2
  • Moropoulou, A., Bakolas, A., Moundoulas, P., Aggelakopoulou, E., Anagnostopoulou, S.: “Strength development and lime reaction in mortars for repairing historic masonries”, Cem. Concr. Compos., Vol. 27 (2005), pp. 289-294. doi:10.1016/j.cemconcomp.2004.02.017
  • Le Troëdec, M., Peyratout, C. S., Smith, A. and Chotard, T.: “Influence of various chemical treatments on the interactions between hemp fibres and a lime matrix”, J. Eur. Ceram. Soc., Vol. 29 (2009), pp. 1861-1868. doi:10.1016/j.jeurceramsoc.2008.11.016
  • Zapata, A., Bosch, P.: “Low temperature preparation of belitic cement clinker”, J. Eur. Ceram. Soc., Vol. 29 (2009), pp. 1879-1885. doi:10.1016/j.jeurceramsoc.2008.11.004
  • Moropoulou, A., Bakolas, A., Aggelakopoulou, E.: “The effects of limestone characteristics and calcination temperature to the reactivity of the quicklime”, Cem. Concr. Res., Vol. 31 (2001), pp. 633-639. doi:10.1016/S0008-8846(00)00490-7
  • Meier, A., Bonaldi, E., Cella, G. M., Lipinski, W., Wuillemin, D., Palumbo, R.: “Design and experimental investigation of a horizontal rotary reactor for the solar thermal production of lime”, Energy, Vol. 29 (2004), pp. 811-821. doi:10.1016/S0360-5442(03)00187-7
  • Rixom, R., Mailvaganam, N.: Chemical admixtures for concrete., p. 213, E & FN SPON, London, (1999). doi:10.4324/9780203017241
  • Leeman, A., Winnefeld, F.: “The effect of viscosity modifying agents on mortar and concrete”, Cem. Concr. Res., Vol. 29 (2007), pp. 341-349. doi:10.1016/j.cemconcomp.2007.01.004
  • Zhang, D. F., Ju, B. Z., Zhang, S. F., Yang J. Z.: “The study on the synthesis and action mechanism of starch succinate half ester as water-reducing agent with super retarding performance”, Carbohydr. Polym., Vol. 71 (2008), pp. 80-84. doi:10.1016/j.carbpol.2007.05.020
  • Zhang, D. F., Ju, B. Z., Zhang, S. F., He, L., Yang, J. Z.: “The study on the dispersing mechanism of starch sulfonate as a water-reducing agent for cement”, Carbohydr. Polym., Vol. 70 (2007), pp. 363-368. doi:10.1016/j.carbpol.2007.04.024
  • Peschard, A., Govin, A., Grosseau, P., Guilhot, B., Guyonnet, R.: “Effect of polysaccharides on the hydration of cement pastes at early ages”, Cem. Concr. Res., Vol. 34 (2004), pp. 2153-2158. doi:10.1016/j.cemconres.2004.04.001
  • Vieira, M. C., Klemm, D., Einfeldt, L., Albrecht, G.: “Dispersing agents for cement based on modified polysaccharides”, Cem. Concr. Res., Vol. 35 (2005), pp. 883-890. doi:10.1016/j.cemconres.2004.09.022
  • Glenn, G. M., Miller, R. M., Orts, W. J.: “Moderate strength ligthweight concrete from organic aquagel mixtures”, Ind. Crop. Prod., Vol. 8 (1998), pp. 123-132. doi:10.1016/S0926-6690(97)10016-4
  • Ouyang, X., Jiang, X., Qiu, X., Yang, D., Pang, Y.: “Effect of molecular weight of sulfanilic acid-phenol-formaldehyde condensate on the properties of cementitious system”, Cem. Concr. Res., Vol. 39 (2009), pp. 283-288. doi:10.1016/j.cemconres.2009.01.002
  • Papo, A., Piani, L.: “Effect of various superplasticizers on the rheological properties of Portland cement pastes”, Cem. Concr. Res., Vol. 34 (2004), pp. 2097-2101. doi:10.1016/j.cemconres.2004.03.017
  • Fernandes, V., Silva, L., Ferreira, V. M., Labrincha, J. A.: “Evaluation of mixing and application process parameters of single-coat mortars”, Cem. Concr. Res., Vol. 35 (2005), pp. 836-841. doi:10.1016/j.cemconres.2004.10.026
  • Peschard, A., Govin, A., Pourchez, J., Fredon, E., Bertrand, L., Maximilien, S., Guilhot, B.: “Effect of polysaccharides on the hydration of cement suspension”, J. Eur. Ceram. Soc., Vol. 26 (2006), pp. 1439-1445. doi:10.1016/j.jeurceramsoc.2005.02.005
  • Pourchez, J., Govin, A., Grosseau, P., Guyonnet, R., Guilhot, B., Ruot, B.: “Alkaline stability of cellulose ethers and impact of their degradation products on cement hydration”, Cem. Concr. Res., Vol. 36 (2006), pp. 1252-1256. doi:10.1016/j.cemconres.2006.03.028
  • Pourchez, J., Peschard A., Grosseau, P., Guyonnet, R., Guilhot, B., Vallee, F.: “HPMC and HEMC influence on cement hydration”, Cem. Concr. Res., Vol. 36 (2006), pp. 288-294. doi:10.1016/j.cemconres.2005.08.003
  • Jolicoeur, C., Simard, M. A.: “Chemical admixture-cement interactions: phenomenology and physico-chemical concepts”, Cem. Concr. Compos., Vol. 20 (1998), pp. 87-101. doi:10.1016/S0958-9465(97)00062-0
  • Lanas, J., Perez-Bernal J. L., Bello, M. A., Alvarez, J. I.: “Mechanical properties of masonry repair dolomitic lime-based mortars”, Cem. Concr. Res., Vol. 36 (2006), pp. 951-960. doi:10.1016/j.cemconres.2005.10.004
  • Lanas, J., Perez-Bernal J. L., Bello, M. A., Alvarez, J. I.: “Mechanical properties of natural hydraulic lime-based mortars”, Cem. Concr. Res., Vol. 34 (2004), pp. 2191-2201. doi:10.1016/j.cemconres.2004.02.005
  • Arandigoyen, M., Alvarez, J. I.: “Carbonation process in lime pastes with different water/binder ratio”, Mater. Construcc., Vol. 56 (2006), pp. 5-18.
  • Arandigoyen, M., Bicer-Simsir, B., Alvarez, J. I., Lange, D. A.: “Variation of microstructure with carbonation in lime and blended pastes”, Appl. Surf. Sci., Vol. 252 (2006), pp. 7562-7571. doi:10.1016/j.apsusc.2005.09.007
  • Arandigoyen, M., Alvarez, J. I.: “Pore structure and carbonation in blended limecement pastes”, Mater. Construcc., Vol. 56 (2006), pp. 17-30.
  • Rodriguez-Navarro, C., Ruiz-Agudo, E., Ortega-Huertas, E., Hansen, E.: “Nanostructure and irreversible colloidal behavior of Ca(OH)2: implications in cultural heritage conservation”, Langmuir 2005; 21: 10948-10957. doi:10.1021/la051338f PMid:16285758
  • Izaguirre, A., Lanas, J., Alvarez, J. I.: “Effect of water-repellent admixtures on the behaviour of aerial lime-based mortars”, Cem. Concr. Res., Vol. 39 (2009), pp. 1095-1104. doi:10.1016/j.cemconres.2009.07.026
  • Izaguirre, A., Lanas, J., Alvarez, J. I.: “Ageing of lime mortars with admixtures: durability and strength assessment”, Cem. Concr. Res, in press, 10.1016/j.cemconres.2010.02.013.
  • Seabra, M. P., Paiva, H., Labrincha, J. A., Ferreira, V. M.: “Admixtures effect on fresh state properties of aerial lime based mortars”, Constr. Build. Mater., Vol. 23 (2009), pp. 1147-1153. doi:10.1016/j.conbuildmat.2008.06.008
  • Fortes-Revilla, C., Martinez-Remirez, S., Blanco-Varela, M. T.: “Modelling of slaked-lime metacaolín mortar engineering characteristics in terms of process variables”, Cem. Concr. Compos., Vol. 28 (2006), pp. 458-467. doi:10.1016/j.cemconcomp.2005.12.006
  • Izaguirre, A., Lanas, J., Alvarez, J. I.: “Behaviour of a starch as a viscosity modifier for aerial lime-based mortars”, Carbohyd. Polym., Vol. 80 (2010), pp. 222-228. doi:10.1016/j.carbpol.2009.11.010
  • UNE 459-1, Building lime. Part 1. Definition, specification and conformity criteria (2001).
  • UNE-EN 1015-11, Methods of test for mortar for masonry. Part 11: Determination of flexural and compressive strength of hardened mortar (2000).
  • UNE-EN 1015-18, Methods of test for mortar for masonry. Part 18: Determination of water absorption coefficient due to capillary action of hardened mortar (2003).
  • UNE-EN 1015-19, Methods of test for mortar for masonry. Part 19: Determination of water vapour permeability of hardened rendering and plastering mortars (1999).
  • Rilem: “Recommended tests to measure the deterioration of stone and asses the effectiveness of treatment methods”, Mater. Struct., Vol. 13 (1980), pp. 175-253.
  • Lanas, J., Sirera, R., Alvarez, J. I.: “Study of the mechanical behavior of masonry repair lime-based mortars cured and exposed under different conditions”, Cem. Concr. Res., Vol. 36 (2006), pp. 961-970. doi:10.1016/j.cemconres.2005.12.003
  • Collins, F. G., Sanjayan, J. G.: “Workability and mechanical properties of alkali activated slag concrete”; Cem. Concr. Res., Vol. 29 (1999), pp. 455-458. doi:10.1016/S0008-8846(98)00236-1
  • Mesbah, H. A., Buyle-Bodin, F.: “Efficiency of polypropylene and metallic fibres on control of shrinkage and cracking of recycled aggregate mortars”, Constr. Build. Mater., Vol. 13 (1999), pp. 439-447. doi:10.1016/S0950-0618(99)00047-1
  • Fernandes, V., Silva, L., Ferreira, V. M., Labrincha, J. A.: “Influence of the kneading water content in the behaviour of single-coat mortars”, Cem. Concr. Res., Vol. 35 (2005), pp. 1900-1908. doi:10.1016/j.cemconres.2005.04.011
  • Arandigoyen, M., Perez Bernal, J. L., Bello Lopez, M. A., Alvarez, J. I.: “Limepastes with different kneading water: Pore structure and capillary porosity”, Appl. Surf. Sci., Vol. 252 (2005) pp. 1449-1459. doi:10.1016/j.apsusc.2005.02.145
  • Billong, N., Melo, U. C., Njopwouo, D., Louvet, F., Bonnet, J. P.: “Effect of mixture constituents on properties of slaked lime-metakaolin-sand mortars containing sodium hydroxide”, Cem. Concr. Compos., Vol. 31 (2009), pp. 658-662. doi:10.1016/j.cemconcomp.2009.06.001
  • Papayianni, I., Stefanidou, M.: “Strength-porosity relationships in lime-puzzolan mortars”, Constr. Build. Mater., Vol. 20 (2006), pp. 700-705. doi:10.1016/j.conbuildmat.2005.02.012
  • Mosquera, M. J., Benitez, D., Perry, S. H.: “Pore structure in mortars applied on restoration. Effect on properties relevant to decay of granite buildings”, Cem. Concr. Res., Vol. 32 (2002), pp. 1883-1888. doi:10.1016/S0008-8846(02)00887-6
  • Arıoglu, N., Acun, S.: “A research about a method for restoration of traditional lime mortars and plasters: A staging system approach”, Build. Environ., Vol. 41 (2006), pp. 1223–1230. doi:10.1016/j.buildenv.2005.05.015
Fonte de datos: Dialnet