Publications (20) Publications auxquelles un chercheur a participé

2016

  1. A novel self-tuning method for Lamb wave inspection of plate-like structures

    8th European Workshop on Structural Health Monitoring, EWSHM 2016

  2. An all-in-one numerical methodology for fretting wear and fatigue life assessment

    Frattura ed Integrita Strutturale, Vol. 10, Núm. 37, pp. 87-93

  3. Analysis of the fatigue performance of thick t-joint samples considering residual stresses

    ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE)

  4. Analysis, optimization and accuracy assessment of special-purpose portable machines by virtual techniques

    International Journal of Machine Tools and Manufacture, Vol. 111, pp. 31-42

  5. Characterisation of ultraviolet curing resins for 3D pultrusion

    ECCM 2016 - Proceeding of the 17th European Conference on Composite Materials

  6. Concept design of high precision portable machines for the in-situ manufacturing of the ITER vacuum vessel

    Proceedings of the 16th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2016

  7. Design, manufacturing and evaluation of glass/polyester composite crash structures for lightweight vehicles

    International Journal of Automotive Technology, Vol. 17, Núm. 6, pp. 1013-1022

  8. Dynamic 4 ENF test for a strain rate dependent mode II interlaminar fracture toughness characterization of unidirectional carbon fibre epoxy composites

    Polymer Testing, Vol. 55, pp. 212-218

  9. Dynamic characterisation and modelling of the orthotropic self-reinforced polypropylene used in alternative FMLs

    Composite Structures, Vol. 153, pp. 682-691

  10. Effect of fibre volume fraction on energy absorption capabilities of E-glass/polyester automotive crash structures

    Composites Part B: Engineering, Vol. 85, pp. 1-7

  11. Impact behaviour of glass fibre-reinforced epoxy/aluminium fibre metal laminate manufactured by Vacuum Assisted Resin Transfer Moulding

    Composite Structures, Vol. 140, pp. 118-124

  12. Influence of Tool Wear on Residual Stresses When Turning Inconel 718

    Procedia CIRP

  13. Optimization of the semi-hexagonal geometry of a composite crush structure by finite element analysis

    Composites Part B: Engineering, Vol. 93, pp. 56-66

  14. Out of die ultraviolet pultrusion process set-up: Limitations of photo-differential scanning calorimetry analysis

    ECCM 2016 - Proceeding of the 17th European Conference on Composite Materials

  15. PWAS inspection in materials with different properties

    8th European Workshop on Structural Health Monitoring, EWSHM 2016

  16. Rate-dependent phenomenological model for self-reinforced polymers

    Composites Part A: Applied Science and Manufacturing, Vol. 84, pp. 96-102

  17. Repeated low energy impact behaviour of self-reinforced polypropylene fibre metal laminates

    ECCM 2016 - Proceeding of the 17th European Conference on Composite Materials

  18. The compression behaviour of non-crimp fabrics composites for automotive applications

    ECCM 2016 - Proceeding of the 17th European Conference on Composite Materials

  19. Thermodiffusion, molecular diffusion and Soret coefficients of aromatic+n-alkane binary mixtures

    Journal of Chemical Physics, Vol. 145, Núm. 13

  20. Vibration attenuation of conductive beams by inducing eddy currents

    Journal of Physics: Conference Series