Área
1EPS Mecánica Aplicada-MAPLI
Publicacions (20) Publicacions en què ha participat algun/a investigador/a
2016
-
A novel self-tuning method for Lamb wave inspection of plate-like structures
8th European Workshop on Structural Health Monitoring, EWSHM 2016
-
An all-in-one numerical methodology for fretting wear and fatigue life assessment
Frattura ed Integrita Strutturale, Vol. 10, Núm. 37, pp. 87-93
-
Analysis of the fatigue performance of thick t-joint samples considering residual stresses
ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE)
-
Analysis, optimization and accuracy assessment of special-purpose portable machines by virtual techniques
International Journal of Machine Tools and Manufacture, Vol. 111, pp. 31-42
-
Characterisation of ultraviolet curing resins for 3D pultrusion
ECCM 2016 - Proceeding of the 17th European Conference on Composite Materials
-
Concept design of high precision portable machines for the in-situ manufacturing of the ITER vacuum vessel
Proceedings of the 16th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2016
-
Design, manufacturing and evaluation of glass/polyester composite crash structures for lightweight vehicles
International Journal of Automotive Technology, Vol. 17, Núm. 6, pp. 1013-1022
-
Dynamic 4 ENF test for a strain rate dependent mode II interlaminar fracture toughness characterization of unidirectional carbon fibre epoxy composites
Polymer Testing, Vol. 55, pp. 212-218
-
Dynamic characterisation and modelling of the orthotropic self-reinforced polypropylene used in alternative FMLs
Composite Structures, Vol. 153, pp. 682-691
-
Effect of fibre volume fraction on energy absorption capabilities of E-glass/polyester automotive crash structures
Composites Part B: Engineering, Vol. 85, pp. 1-7
-
Impact behaviour of glass fibre-reinforced epoxy/aluminium fibre metal laminate manufactured by Vacuum Assisted Resin Transfer Moulding
Composite Structures, Vol. 140, pp. 118-124
-
Influence of Tool Wear on Residual Stresses When Turning Inconel 718
Procedia CIRP
-
Optimization of the semi-hexagonal geometry of a composite crush structure by finite element analysis
Composites Part B: Engineering, Vol. 93, pp. 56-66
-
Out of die ultraviolet pultrusion process set-up: Limitations of photo-differential scanning calorimetry analysis
ECCM 2016 - Proceeding of the 17th European Conference on Composite Materials
-
PWAS inspection in materials with different properties
8th European Workshop on Structural Health Monitoring, EWSHM 2016
-
Rate-dependent phenomenological model for self-reinforced polymers
Composites Part A: Applied Science and Manufacturing, Vol. 84, pp. 96-102
-
Repeated low energy impact behaviour of self-reinforced polypropylene fibre metal laminates
ECCM 2016 - Proceeding of the 17th European Conference on Composite Materials
-
The compression behaviour of non-crimp fabrics composites for automotive applications
ECCM 2016 - Proceeding of the 17th European Conference on Composite Materials
-
Thermodiffusion, molecular diffusion and Soret coefficients of aromatic+n-alkane binary mixtures
Journal of Chemical Physics, Vol. 145, Núm. 13
-
Vibration attenuation of conductive beams by inducing eddy currents
Journal of Physics: Conference Series