Publicacions (16) Publicacions en què ha participat algun/a investigador/a

2021

  1. A coupled 3D wear and fatigue numerical procedure: Application to fretting problems in ultra-high strength steel wires

    International Journal of Fatigue, Vol. 143

  2. A novel machine learning‐based methodology for tool wear prediction using acoustic emission signals

    Sensors, Vol. 21, Núm. 17

  3. A novel methodology to characterize tool-chip contact in metal cutting using partially restricted contact length tools

    CIRP Annals, Vol. 70, Núm. 1, pp. 61-64

  4. An analytical approach to calculate stress concentration factors of machined surfaces

    International Journal of Mechanical Sciences, Vol. 190

  5. Analytical model to calculate radial forces in permanent‐magnet synchronous machines

    Applied Sciences (Switzerland), Vol. 11, Núm. 22

  6. Bactericidal surfaces: An emerging 21st-century ultra-precision manufacturing and materials puzzle

    Applied Physics Reviews, Vol. 8, Núm. 2

  7. Ball-on-flat linear reciprocating tests: Critical assessment of wear volume determination methods and suggested improvements for ASTM D7755 standard

    Wear, Vol. 470-471

  8. Comparative study of finishing techniques for age-hardened Inconel 718 alloy

    Journal of Materials Research and Technology, Vol. 15, pp. 5623-5634

  9. Experimental evaluation and surface integrity analysis of cryogenic coolants approaches in the cylindrical plunge grinding

    Scientific Reports, Vol. 11, Núm. 1

  10. Impregnation quality diagnosis in Resin Transfer Moulding by machine learning

    Composites Part B: Engineering, Vol. 221

  11. Integral Design and Manufacturing Methodology of a Reduced-Scale Servo Press

    IEEE/ASME Transactions on Mechatronics, Vol. 26, Núm. 5, pp. 2418-2428

  12. Optimum slot and pole design for vibration reduction in permanent magnet synchronous motors

    Applied Sciences (Switzerland), Vol. 11, Núm. 11

  13. Quasi-static and dynamic crush behaviour of 3D printed thin-walled profiles reinforced with continuous carbon and glass fibres

    Composites Part B: Engineering, Vol. 217

  14. Quasi-static transmission error behavior under the composite effect of temperature and load

    Gear Technology, pp. 34-44

  15. The effect of cross-section geometry on crushing behaviour of 3D printed continuous carbon fibre reinforced polyamide profiles

    Composite Structures, Vol. 274

  16. The interaction between the sheet/tool surface texture and the friction/galling behaviour on aluminium deep drawing operations

    Metals, Vol. 11, Núm. 6