Arloa
1EPS Mecánica Aplicada-MAPLI
Artikuluak (18) Ikertzaileren baten partaidetza izan duten argitalpenak
2019
-
3D printed microstructured Au/TiO2 catalyst for hydrogen photoproduction
Applied Materials Today, Vol. 16, pp. 265-272
-
A coupled crack initiation and propagation numerical procedure for combined fretting wear and fretting fatigue lifetime assessment
Theoretical and Applied Fracture Mechanics, Vol. 101, pp. 294-305
-
An analysis of the dynamical behaviour of systems with fractional damping for mechanical engineering applications
Symmetry, Vol. 11, Núm. 12
-
Análisis numérico de la contribución de shot peening en el comportamiento a fatiga de uniones soldadas multipasada
Anales de mecánica de la fractura, Núm. 36, pp. 58-64
-
Benchmarking of several material constitutive models for tribology, wear, and other mechanical deformation simulations of Ti6Al4V
Journal of the Mechanical Behavior of Biomedical Materials, Vol. 97, pp. 126-137
-
Critical analysis of the suitability of crack propagation direction criteria for 2D cylindrical plain fretting contact
Engineering Fracture Mechanics, Vol. 214, pp. 534-543
-
Design and characterisation of cellular composite structures for automotive crash-boxes manufactured by out of die ultraviolet cured pultrusion
Composites Part B: Engineering, Vol. 160, pp. 217-224
-
Development of a modular fretting wear and fretting fatigue tribometer for thin steel wires: Design concept and preliminary analysis of the effect of crossing angle on tangential force
Metals, Vol. 9, Núm. 6
-
Dynamic analysis of plates with thick unconstrained layer damping
Engineering Structures, Vol. 201
-
Effect of magneto-elastic force on magneto-dynamic model of viscoelastic-magnetorheological sandwiches
Smart Materials and Structures, Vol. 28, Núm. 7
-
Electromechanical properties of PVDF-based polymers reinforced with nanocarbonaceous fillers for pressure sensing applications
Materials, Vol. 12, Núm. 21
-
Fatigue life estimation of cast aluminium alloys considering the effect of porosity on initiation and propagation phases
International Journal of Fatigue, Vol. 125, pp. 468-478
-
Influencia del acabado superficial y la porosidad en el comportamiento a fatiga de la aleación A356
Anales de mecánica de la fractura, Núm. 36, pp. 581-585
-
Methodology to establish a hybrid model for prediction of cutting forces and chip thickness in orthogonal cutting condition close to broaching
International Journal of Advanced Manufacturing Technology, Vol. 101, Núm. 5-8, pp. 1357-1374
-
On the role of a ZDDP in the tribological performance of femtosecond laser-induced periodic surface structures on titanium alloy against different counterbody materials
Lubricants, Vol. 7, Núm. 9
-
Ply and interlaminar behaviours of 3D printed continuous carbon fibre-reinforced thermoplastic laminates; effects of processing conditions and microstructure
Additive Manufacturing, Vol. 30
-
State-space analysis of mode-coupling workpiece chatter
International Journal of Advanced Manufacturing Technology, Vol. 103, Núm. 5-8, pp. 2773-2781
-
The minimum shear stress range criterion and its application to crack orientation prediction in incomplete contact fretting problems
International Journal of Fatigue, Vol. 129