1EPS Mecánica Aplicada-MAPLI

2019

1. 3D printed microstructured Au/TiO2 catalyst for hydrogen photoproduction

   Applied Materials Today, Vol. 16, pp. 265-272

2. A coupled crack initiation and propagation numerical procedure for combined fretting wear and fretting fatigue lifetime assessment

   Theoretical and Applied Fracture Mechanics, Vol. 101, pp. 294-305

3. An analysis of the dynamical behaviour of systems with fractional damping for mechanical engineering applications

   Symmetry, Vol. 11, Núm. 12

4. Análisis numérico de la contribución de shot peening en el comportamiento a fatiga de uniones soldadas multipasada

   Anales de mecánica de la fractura, Núm. 36, pp. 58-64

5. Benchmarking of several material constitutive models for tribology, wear, and other mechanical deformation simulations of Ti6Al4V

   Journal of the Mechanical Behavior of Biomedical Materials, Vol. 97, pp. 126-137

6. Critical analysis of the suitability of crack propagation direction criteria for 2D cylindrical plain fretting contact

   Engineering Fracture Mechanics, Vol. 214, pp. 534-543

7. Design and characterisation of cellular composite structures for automotive crash-boxes manufactured by out of die ultraviolet cured pultrusion

   Composites Part B: Engineering, Vol. 160, pp. 217-224

8. Development of a modular fretting wear and fretting fatigue tribometer for thin steel wires: Design concept and preliminary analysis of the effect of crossing angle on tangential force

   Metals, Vol. 9, Núm. 6

9. Dynamic analysis of plates with thick unconstrained layer damping

   Engineering Structures, Vol. 201

10. Effect of magneto-elastic force on magneto-dynamic model of viscoelastic-magnetorheological sandwiches

    Smart Materials and Structures, Vol. 28, Núm. 7

11. Electromechanical properties of PVDF-based polymers reinforced with nanocarbonaceous fillers for pressure sensing applications

    Materials, Vol. 12, Núm. 21

12. Fatigue life estimation of cast aluminium alloys considering the effect of porosity on initiation and propagation phases

    International Journal of Fatigue, Vol. 125, pp. 468-478

13. Influencia del acabado superficial y la porosidad en el comportamiento a fatiga de la aleación A356

    Anales de mecánica de la fractura, Núm. 36, pp. 581-585

14. Methodology to establish a hybrid model for prediction of cutting forces and chip thickness in orthogonal cutting condition close to broaching

    International Journal of Advanced Manufacturing Technology, Vol. 101, Núm. 5-8, pp. 1357-1374

15. On the role of a ZDDP in the tribological performance of femtosecond laser-induced periodic surface structures on titanium alloy against different counterbody materials

    Lubricants, Vol. 7, Núm. 9

16. Ply and interlaminar behaviours of 3D printed continuous carbon fibre-reinforced thermoplastic laminates; effects of processing conditions and microstructure

    Additive Manufacturing, Vol. 30

17. State-space analysis of mode-coupling workpiece chatter

    International Journal of Advanced Manufacturing Technology, Vol. 103, Núm. 5-8, pp. 2773-2781

18. The minimum shear stress range criterion and its application to crack orientation prediction in incomplete contact fretting problems

    International Journal of Fatigue, Vol. 129