Articles (170) Publicacions en què ha participat algun investigador/a Mostra dades de recerca referenciades.

filter_list Tipus (agr.) Articles

2025

  1. Application of Oxide Wear Models to Radial Fretting

    Tribology Letters, Vol. 73, Núm. 1

  2. Dimple prediction modelling in ultrashort laser processing: A benchmark study on ablation threshold determination methods and incubation models

    Surface and Coatings Technology, Vol. 497

  3. Fast Finite Element Based Vibration Response Calculation Procedure for Permanent Magnet Synchronous Machines

    IEEE Transactions on Industry Applications, Vol. 61, Núm. 1, pp. 104-114

  4. Impact of mean stress on mooring line fatigue assessment: An analytical study

    Ocean Engineering, Vol. 324

  5. Impact performance comparison of carbon fiber reinforced polyamide 6 and fast-curing epoxy composites manufactured by resin transfer molding

    Polymer Composites, Vol. 46, Núm. 6, pp. 5631-5639

  6. Influence of Manufacturing Tolerances and Eccentricities on the Electromotive Force in Permanent Magnet Synchronous Motors

    IEEE Transactions on Industry Applications

  7. Microstructure-Based Numerical Modeling and Experimental Analysis of the Effect of Fiber-Matrix Separation in Glass-Reinforced Polyamide-6 Forged Components

    Polymer Composites

  8. Recycling Fiber-Reinforced Polyamide Waste from the Automotive Industry: Life Cycle Assessment (LCA) of an Advanced Pyrolysis Process to Reclaim Glass Fibers and Valuable Chemicals

    Materials, Vol. 18, Núm. 7

  9. Semi-analytical methodology for fretting wear evaluation of unlubricated pitch bearing raceways under operative and non-operative periods

    Wind Energy Science, Vol. 10, Núm. 2, pp. 401-415

2024

  1. Análisis de la fractura prematura del vidrio durante el temple mediante simulación basada en interacción fluido-estructura

    Revista española de mecánica de la fractura, Núm. 7, pp. 65-70

  2. Aplicación de la teoría de distancias críticas para la evaluación de la vida a fatiga de engranajes rectos

    Revista española de mecánica de la fractura, Núm. 7, pp. 193-198

  3. Benchmarking of spectral methods for fatigue assessment of mooring systems and dynamic cables in offshore renewable energy technologies

    Ocean Engineering, Vol. 308

  4. Breakage risk analysis during the glass tempering process based on fluid–structure interaction approach

    Glass Structures and Engineering, Vol. 9, Núm. 3, pp. 455-469

  5. Development of Flame-Retardant Polylactic Acid Formulations for Additive Manufacturing

    Polymers, Vol. 16, Núm. 8

  6. Evaluación de la vida útil a fatiga de líneas de amarre de convertidores de energía undimotriz en condiciones de oleaje realistas

    Revista española de mecánica de la fractura, Núm. 7, pp. 205-210

  7. High-temperature tribological performance of functionally graded Stellite 6/WC metal matrix composite coatings manufactured by laser-directed energy deposition

    Friction, Vol. 12, Núm. 3, pp. 522-538

  8. Impact behaviour of bio-inspired sandwich panels integrally manufactured from 3D printed continuous carbon fibre reinforced polyamide

    Composites Science and Technology, Vol. 250

  9. Impact of surface roughness on the coefficient of friction of polymer-on-polymer contacts for deflection pulley-rope systems in the lift industry

    Friction, Vol. 12, Núm. 9, pp. 2126-2138

  10. Influence of turning parameters on residual stresses and roughness of 42CrMo4 + QT

    International Journal of Advanced Manufacturing Technology, Vol. 134, Núm. 5-6, pp. 2897-2919

  11. Low-velocity impact performance of integrally-3D printed continuous carbon fibre composite sandwich panels

    Materials Letters, Vol. 354