1ENG Mechanics and industrial production

2022

1. Analysis of thermophoresis for separation of polystyrene microparticles in microfluidic devices

   International Journal of Heat and Mass Transfer, Vol. 189

2. Caracterización del par de fricción en contactos rodantes lubricados a diferentes escalas

   Congreso Iberoamericano de Ingeniería Mecánica (CIBIM)

3. Challenges and issues in continuum modelling of tribology, wear, cutting and other processes involving high-strain rate plastic deformation of metals

   Journal of the Mechanical Behavior of Biomedical Materials, Vol. 130

4. Compresión axial de tubos auxéticos fabricados mediante impresión 3D de poliamida reforzada con fibra corta de carbono

   Revista de Materiales Compuestos

5. Correlations between helicity and optical losses within general electromagnetic scattering theory

   Materials Advances, Vol. 3, Núm. 10, pp. 4179-4185

6. Crystal Plasticity Modeling of Al Alloy under Linear and Non-Linear Loading

   Key Engineering Materials

7. Designing for Shape Memory in Additive Manufacturing of Cu–Al–Ni Shape Memory Alloy Processed by Laser Powder Bed Fusion

   Materials, Vol. 15, Núm. 18

8. Efectos de la temperatura en la microestructura y en la respuesta mecánica de polímeros impresos 3D reforzados con fibra de carbono

   Revista de Materiales Compuestos

9. Effect of innovative finishing operations on the tribological performance of steel 27MnCr5

   Procedia CIRP

10. Effect of surface integrity generated by machining on isothermal low cycle fatigue performance of Inconel 718

    Engineering Failure Analysis, Vol. 137

11. Effect of voids on the impact properties of Non-Crimp fabric carbon/epoxy laminates manufactured by liquid composite Moulding

    Composite Structures, Vol. 297

12. Enhancing surface integrity of A7050-T7451 aluminium alloy by pneumatic machine hammer peening

    Procedia CIRP

13. In-situ analysis of the elastic-plastic characteristics of high strength dual-phase steel

    Materials Science and Engineering A, Vol. 857

14. Influence of Coulomb’s Friction Coefficient in Finite Element Modeling of Orthogonal Cutting of Ti6Al4V

    Key Engineering Materials

15. Influence of high frequency wobbling parameters on the weld quality of aluminium LBW

    Procedia CIRP

16. Integration of Hot Isostatic Pressing and Heat Treatment for Advanced Modified γ-TiAl TNM Alloys

    Materials, Vol. 15, Núm. 12

17. Interlaminar fracture toughness of 3D printed continuous carbon fibre- reinforced polyamide

    Revista de Materiales Compuestos

18. Mechanical properties of friction induced nanocrystalline pearlitic steel

    Scientific Reports, Vol. 12, Núm. 1

19. Numerical analysis of different mass transfer models for falling film absorbers

    International Journal of Heat and Mass Transfer, Vol. 182

20. Numerical modelling of the drag finishing process at a macroscopic scale to optimize surface roughness improvement on additively manufactured (SLM) Inconel 718 parts

    Procedia CIRP