1ENG Mechanics and industrial production

2015

1. A note on interpreting tool temperature measurements from thermography

   Machining Science and Technology, Vol. 19, Núm. 1, pp. 174-181

2. Characterisation of the elastic and damping properties of traditional FML and FML based on a self-reinforced polypropylene

   Composite Structures, Vol. 131, pp. 47-54

3. Comparison of several behaviour laws intended to produce a realistic Ti6Al4V chip by finite elements modelling

   Key Engineering Materials

4. Comparison of the hardening behaviour of different steel families: From mild and stainless steel to advanced high strength steels

   International Journal of Mechanical Sciences, Vol. 101-102, pp. 10-20

5. Comparison of three methods for material hardening parameter identification under cyclic tensioncompression loadings: Roll levelling case study

   Key Engineering Materials

6. Contribution to the benchmark for ternary mixtures: Determination of Soret coefficients by the thermogravitational and the sliding symmetric tubes techniques

   European Physical Journal E, Vol. 38, Núm. 4

7. Contribution to thermodiffusion coefficient measurements in DCMIX project

   International Journal of Thermal Sciences, Vol. 92, pp. 14-16

8. DOES UNIT CELL SIZE PLAY A ROLE? AN OVERVIEW OF MECHANICAL PROPERTIES OF WOVEN LAMINATES

   20TH INTERNATIONAL CONFERENCE ON COMPOSITE MATERIALS

9. Determination of heat transfer coefficients for different initial tool temperatures and closed loop controlled constant contact pressures

   Key Engineering Materials

10. Determination of the magnetic losses in laminated cores under pulse width modulation voltage supply

    Physics of Metals and Metallography, Vol. 116, Núm. 8, pp. 774-780

11. Does unit cell size play a role? An overview of mechanical properties of woven laminates

    ICCM International Conferences on Composite Materials

12. Dynamic properties of thin sandwich structures: Influence of viscoelastic core

    22nd International Congress on Sound and Vibration, ICSV 2015

13. Effects of Microstructure on the Variation of the Unloading Behavior of DP780 Steels

    Journal of Materials Engineering and Performance, Vol. 24, Núm. 10, pp. 3737-3745

14. Finite element prediction of the tool wear influence in Ti6Al4V machining

    Procedia CIRP

15. Hydrogen production by steam reforming of m-cresol, a bio-oil model compound, using catalysts supported on conventional and unconventional supports

    International Journal of Hydrogen Energy

16. Hydrogen production from n-butanol over alumina and modified alumina nickel catalysts

    International Journal of Hydrogen Energy, Vol. 40, Núm. 15, pp. 5272-5280

17. Improvement of accuracy in a free bending test for material characterization

    International Journal of Mechanical Sciences, Vol. 103, pp. 288-296

18. Influence of fluoride content and pH on corrosion and tribocorrosion behaviour of Ti13Nb13Zr alloy in oral environment

    Journal of the Mechanical Behavior of Biomedical Materials, Vol. 49, pp. 186-196

19. Interfacial pattern selection in miscible liquids under vibration

    Soft Matter, Vol. 11, Núm. 42, pp. 8221-8224

20. Investigation of Fickian diffusion in the ternary mixtures of water-ethanol-triethylene glycol and its binary pairs

    Physical Chemistry Chemical Physics, Vol. 17, Núm. 41, pp. 27713-27725