1ENG Electric energy

2012

1. An experimentally verified active gate control method for the series connection of IGBT/diodes

   IEEE Transactions on Power Electronics, Vol. 27, Núm. 2, pp. 1025-1038

2. Analysis and Comparison of PWM Modulation Methods in VSI-Fed PMSM Drive Systems

   2012 XXTH INTERNATIONAL CONFERENCE ON ELECTRICAL MACHINES (ICEM)

3. Analysis and comparison of PWM modulation methods in VSI-Fed PMSM drive systems

   Proceedings - 2012 20th International Conference on Electrical Machines, ICEM 2012

4. Analysis of non-uniform circumferential segmentation of magnets to reduce eddy-current losses in SPMSM machines

   Proceedings - 2012 20th International Conference on Electrical Machines, ICEM 2012

5. Axial-flux-machine modeling with the combination of FEM-2-D and analytical tools

   IEEE Transactions on Industry Applications, Vol. 48, Núm. 4, pp. 1318-1326

6. Baterías y acumuladores del Siglo XXI (1ª parte)

   Revista DYNA, Vol. 87, Núm. 2, pp. 134-137

7. DC voltage signal injection for temperature monitoring in very small resistance induction machines

   Electrical Systems for Aircraft, Railway and Ship Propulsion, ESARS

8. Development and validation of dynacar RT software, a new integrated solution for design of electric and hybrid vehicles

   26th Electric Vehicle Symposium 2012

9. H∞ based control for load mitigation in wind turbines

   Energies, Vol. 5, Núm. 4, pp. 938-967

10. Intelligent Multi-Objective Nonlinear Model Predictive Control (iMO-NMPC): Towards the 'on-line' optimization of highly complex control problems

    Expert Systems with Applications, Vol. 39, Núm. 7, pp. 6527-6540

11. LPV model of wind turbines from GH Bladed's linear models

    Proceedings - 26th European Conference on Modelling and Simulation, ECMS 2012

12. Medium voltage-high power converter topologies comparison procedure, for a 6.6 kV drive application using 4.5 kV IGBT modules

    IEEE Transactions on Industrial Electronics, Vol. 59, Núm. 3, pp. 1462-1476

13. NCV2015: A networked range extended electric vehicle for clean and efficient mobility

    19th Intelligent Transport Systems World Congress, ITS 2012

14. Optimized LCL filter design methodology applied to MV grid-connected multimegawatt VSC

    2012 IEEE Energy Conversion Congress and Exposition, ECCE 2012

15. Scalable high insulation power supply for medium voltage power converters

    2012 7th International Conference on Integrated Power Electronics Systems, CIPS 2012

16. Static switch based solution for improvement of Neutral Sections in HSR systems

    Electrical Systems for Aircraft, Railway and Ship Propulsion, ESARS

17. Structure-property evaluation of trisilanolphenyl POSS®/polysulfone composites as a guide to POSS melt blending

    Journal of Applied Polymer Science, Vol. 125, Núm. 4, pp. 2914-2919

18. The modelling and experimental testing of the vertical dynamic response of an elevator system with a 2:1 roping configuration

    International Conference on Noise and Vibration Engineering 2012, ISMA 2012, including USD 2012: International Conference on Uncertainty in Structure Dynamics

19. The modelling and experimental testing of the vertical dynamic response of an elevator system with a 2:1 roping configuration

    PROCEEDINGS OF INTERNATIONAL CONFERENCE ON NOISE AND VIBRATION ENGINEERING (ISMA2012) / INTERNATIONAL CONFERENCE ON UNCERTAINTY IN STRUCTURAL DYNAMICS (USD2012)

20. The powertrain domain in electric and hybrid vehicles

    International Journal of Electric and Hybrid Vehicles, Vol. 4, Núm. 1, pp. 93-109