Publicacions (20) Publicacions en què ha participat algun/a investigador/a

2023

  1. A Comprehensive Analytical Sizing Methodology for Transverse and Radial Flux Machines

    IEEE Access, Vol. 11, pp. 106063-106082

  2. A direct method to quantify lithium plating on graphite negative electrode of commercial Li-ion cells

    Electrochemistry Communications, Vol. 151

  3. Advanced direct extrusion process with real-time controllable extrusion parameters for microstructure optimization of magnesium alloys

    International Journal of Material Forming, Vol. 16, Núm. 4

  4. Application of a Model-Based Method to the Online Detection of Rotating Rectifier Faults in Brushless Synchronous Machines

    Machines, Vol. 11, Núm. 2

  5. Assessment on power systems non-deterministic state estimation algorithms

    Electric Power Systems Research, Vol. 214

  6. Caracterización experimental del molino de viento de ayanz de eje vertical en aplicaciones de mini eólica y aportaciones en la simplificación de la electrónica asociada

    Revista DYNA, Vol. 98, Núm. 3, pp. 240-246

  7. Contactless Rotor Ground Fault Detection Method for Brushless Synchronous Machines Based on an AC/DC Rotating Current Sensor

    Sensors, Vol. 23, Núm. 22

  8. Creating a Robust SoC Estimation Algorithm Based on LSTM Units and Trained with Synthetic Data

    World Electric Vehicle Journal, Vol. 14, Núm. 7

  9. Data-Driven Low-Frequency Oscillation Event Detection Strategy for Railway Electrification Networks

    Sensors, Vol. 23, Núm. 1

  10. Double Line-to-Ground Faults Detection Method in DC-AC Converters

    IEEE Transactions on Industry Applications, Vol. 59, Núm. 1, pp. 332-344

  11. Gallium Nitride Power Devices: A State of the Art Review

    IEEE Access, Vol. 11, pp. 48628-48650

  12. High Efficiency Converters Based on Modular Partial Power Processing for Fully Electric Maritime Applications

    Electronics (Switzerland), Vol. 12, Núm. 13

  13. Low-Cost Maximum Power Point Tracking Strategy and Protection Circuit Applied to an Ayanz Wind Turbine with Screw Blades

    Energies, Vol. 16, Núm. 17

  14. Onboard Energy Storage Systems for Railway: Present and Trends

    IEEE Open Journal of Industry Applications, Vol. 4, pp. 238-259

  15. Sensitivity Analysis of the Design Parameters of Permanent Magnet Synchronous Motors for Vibration Reduction

    Applied Sciences (Switzerland), Vol. 13, Núm. 9

  16. State of charge estimation combining physics-based and artificial intelligence models for Lithium-ion batteries

    Journal of Energy Storage, Vol. 73

  17. Study of Partial Discharge Inception Voltage in Inverter Fed Electric Motor Insulation Systems

    Applied Sciences (Switzerland), Vol. 13, Núm. 4

  18. Synchronous Generator Stability Characterization for Gas Power Plants Using Load Rejection Tests

    Applied Sciences (Switzerland), Vol. 13, Núm. 20

  19. Tool remaining useful life prediction using bidirectional recurrent neural networks (BRNN)

    International Journal of Advanced Manufacturing Technology, Vol. 125, Núm. 9-10, pp. 4027-4045

  20. Towards Nearly Zero-Energy Buildings in Cold Rural Mediterranean Zones: The Case of La Rioja (Spain)

    Buildings, Vol. 13, Núm. 3