Ámbito de investigación
1EPS Comportamiento mecánico y diseño de producto
Publikationen (28) Publikationen, an denen Forscher/innen teilgenommen haben
2013
-
Development of a carbon fibre composite body for a radio controlled car through a PBL approach
41st SEFI Conference
-
Effects of rotational speed, feed rate and tool type on temperatures and cutting forces when drilling bovine cortical bone
Machining Science and Technology, Vol. 17, Núm. 4, pp. 611-636
-
Experimental and numerical analysis of indentation on a thermoplastic polyurethane elastomer under cyclic loading
Constitutive Models for Rubber VIII - Proceedings of the 8th European Conference on Constitutive Models for Rubbers, ECCMR 2013
-
Experimental and numerical analysis of indentation on a thermoplastic polyurethane elastomer under cyclic loading
Constitutive Models for Rubber VIII (CRC Press), pp. 649-655
-
Experimental characterization and modelling of large-strain viscoelastic behavior of a thermoplastic polyurethane elastomer
Rubber Chemistry and Technology, Vol. 86, Núm. 1, pp. 146-164
-
Finite element simulation of fretting wear and fatigue in thin steel wires
International Journal of Fatigue, Vol. 55, pp. 7-21
-
KIMU BERRI, A UNIVERSITY-INDUSTRY EXPERIENCE FOR PROMOTING YOUTH ENTREPRENEURIAL MINDSET
7TH INTERNATIONAL TECHNOLOGY, EDUCATION AND DEVELOPMENT CONFERENCE (INTED2013)
-
LEGO SERIOUS PLAY AS A TOOL FOR BUILDING THE INNOVATION MANAGEMENT CONCEPT
7TH INTERNATIONAL TECHNOLOGY, EDUCATION AND DEVELOPMENT CONFERENCE (INTED2013)
-
Linear viscoelastic behaviour of magnetorheological elastomers
Constitutive Models for Rubber VIII - Proceedings of the 8th European Conference on Constitutive Models for Rubbers, ECCMR 2013
-
Linear viscoelastic behaviour of magnetorheological elastomers
Constitutive Models for Rubber VIII (CRC Press), pp. 665-670
-
Modification of the ultrasonic properties of elastomers loaded with magnetic particles by applying magnetic fields during curing
IEEE International Ultrasonics Symposium, IUS
-
Numerical characterization of pressure drop through a low speed wind tunnel: Some design aspects
Proceedings of 2013 International Renewable and Sustainable Energy Conference, IRSEC 2013
-
Numerical modeling and design of thermoelectric cooling systems and its application to manufacturing machines
Journal of Electronic Materials, Vol. 42, Núm. 7, pp. 2287-2291
-
Numerical study of the pressure drop phenomena in wound woven wire matrix of a Stirling regenerator
Energy Conversion and Management, Vol. 67, pp. 57-65
-
Polymer-based microfluidic devices for rare cell detection by ultrasounds
Proceedings of IEEE Sensors
-
Polymer-based microfluidic devices for rare cell detection by ultrasounds
2013 IEEE SENSORS
-
QUALITY ASSURANCE IN HIGHER EDUCATION: MONDRAGON UNIVERSITY'S JOURNEY FROM 1995
7TH INTERNATIONAL TECHNOLOGY, EDUCATION AND DEVELOPMENT CONFERENCE (INTED2013)
-
Relaxation modulus - Complex modulus interconversion for linear viscoelastic materials
Mechanics of Time-Dependent Materials, Vol. 17, Núm. 3, pp. 465-479
-
Remarks on the analysis method for determining diffusion coefficient in ternary mixtures
Comptes Rendus - Mecanique
-
TECHNO-CUBE, A PROBLEM-BASED LEARNING PROJECT BASED ON CURRENT INDUSTRY DEMANDS
7TH INTERNATIONAL TECHNOLOGY, EDUCATION AND DEVELOPMENT CONFERENCE (INTED2013)