Publicacions (42) Publicacions en què ha participat algun/a investigador/a

2022

  1. Active Power Optimization of a Turning Process by Cutting Conditions Selection: A Q-Learning Approach

    IEEE International Conference on Emerging Technologies and Factory Automation, ETFA

  2. Anisotropic rate-dependent plasticity and fracture of AA5754

    Congress on Numerical Methods in Engineering CMN 2022 (2022. Las Palmas de Gran Canaria)

  3. Crystal Plasticity Modeling of Al Alloy under Linear and Non-Linear Loading

    Key Engineering Materials

  4. Designing for Shape Memory in Additive Manufacturing of Cu–Al–Ni Shape Memory Alloy Processed by Laser Powder Bed Fusion

    Materials, Vol. 15, Núm. 18

  5. Efecto de la separación fibra-matriz sobre las propiedades mecánicas de una viga forjada en poliamida reforzada con fibra de vidrio = Effect of the fiber-matrix separation on the mechanical properties of a fiberglass reinforced polyamide forged beam

    Revista de Materiales Compuestos; Comunicaciones Matcomp21- Sostenibilidad y reciclaje - Fabricación, Vol. 7, Núm. 1, pp. 1-5

  6. Effect of Tool Geometry and LCO2 Cooling on Cutting Forces and Delamination when Drilling CFRP Composites Using PCD Tools

    Procedia CIRP

  7. Effect of innovative finishing operations on the tribological performance of steel 27MnCr5

    Procedia CIRP

  8. Effect of surface integrity generated by machining on isothermal low cycle fatigue performance of Inconel 718

    Engineering Failure Analysis, Vol. 137

  9. Effect of voids on the impact properties of Non-Crimp fabric carbon/epoxy laminates manufactured by liquid composite Moulding

    Composite Structures, Vol. 297

  10. Enhancing surface integrity of A7050-T7451 aluminium alloy by pneumatic machine hammer peening

    Procedia CIRP

  11. Evaluation of the Maturity Level of Continuous Improvement Based on Improvement Routines: A Case Study of SMEs of Capital Goods

    Lecture Notes in Management and Industrial Engineering (Springer), pp. 257-266

  12. Fibre–Wood Laminate Biocomposites: Seawater Immersion Effects on Flexural and Low Energy Impact Properties

    Polymers, Vol. 14, Núm. 19

  13. Fretting Fatigue as a Limiting Factor on the Durability of Friction Stir Welded Lap Joints Using AA2099-T83 and AA2060-T8E30 Aluminium Alloys

    Journal of Manufacturing and Materials Processing, Vol. 6, Núm. 5

  14. Friction Modelling for Tube Hydroforming Processes—A Numerical and Experimental Study with Different Viscosity Lubricants

    Materials, Vol. 15, Núm. 16

  15. Hole quality analysis of AISI 304-GFRP stacks using robotic drilling

    Procedia CIRP

  16. Identification of the Parameter Values of the Constitutive and Friction Models in Machining Using EGO Algorithm: Application to Ti6Al4V

    Metals, Vol. 12, Núm. 6

  17. Impact performance of out of die UV cured pultruded profiles for vessel structures

    ECCM 2022 - Proceedings of the 20th European Conference on Composite Materials: Composites Meet Sustainability

  18. In-situ analysis of the elastic-plastic characteristics of high strength dual-phase steel

    Materials Science and Engineering A, Vol. 857

  19. Influence of Coulomb’s Friction Coefficient in Finite Element Modeling of Orthogonal Cutting of Ti6Al4V

    Key Engineering Materials

  20. Influence of high frequency wobbling parameters on the weld quality of aluminium LBW

    Procedia CIRP