Publicacions (42) Publicacions en què ha participat algun/a investigador/a

2020

  1. A novel forming technique to coforge bimetal components into complex geometries

    Manufacturing Letters, Vol. 26, pp. 21-24

  2. A novel indirect cryogenic cooling system for improving surface finish and reducing cutting forces when turning ASTM F-1537 cobalt-chromium alloys

    International Journal of Advanced Manufacturing Technology, Vol. 111, Núm. 7-8, pp. 1971-1989

  3. A review of the effects of cyclic contact loading on fretting fatigue behavior

    Advances in Mechanical Engineering, Vol. 12, Núm. 9

  4. A simple device to measure bend limit of sheet metals

    IOP Conference Series: Materials Science and Engineering

  5. Aluminum springback reduction by post-forming electric pulses

    Procedia Manufacturing

  6. An analytical model of through-thickness photopolymerisation of composites: Ultraviolet light transmission and curing kinetics

    Composites Part B: Engineering, Vol. 191

  7. An approach to analyse the factors behind the micromechanical response of 3D-printed composites

    Composites Part B: Engineering, Vol. 186

  8. Analysis of axial crushing behaviour of unsaturated polyester and vinyl ester composites manufactured by out of die ultraviolet cured pultrusion

    ECCM 2018 - 18th European Conference on Composite Materials

  9. Broaching: Cutting tools and machine tools for manufacturing high quality features in components

    CIRP Annals, Vol. 69, Núm. 2, pp. 554-577

  10. Characterization of elastic and resistance behaviours of 3D printed continuous carbon fibre reinforced thermoplastics

    ECCM 2018 - 18th European Conference on Composite Materials

  11. Comparison between cryogenic coolants effect on tool wear and surface integrity in finishing turning of Inconel 718

    Journal of Materials Processing Technology, Vol. 285

  12. Continuous improvement framework to develop cultural change: case study, capital goods company

    TQM Journal, Vol. 32, Núm. 6, pp. 1327-1348

  13. Effect of alumina tri-hydrate filler on the mechanical and optical properties of flame-retardant ultraviolet cured vinyl ester composites

    ECCM 2018 - 18th European Conference on Composite Materials

  14. Effect of boron content and cooling rate on the microstructure and boride formation of β-solidifying γ-tial tnm alloy

    Metals, Vol. 10, Núm. 5

  15. Effect of tool geometry and welding parameters on friction stir welded lap joint formation with aa2099-t83 and aa2060-t8e30 aluminium alloys

    Metals, Vol. 10, Núm. 7, pp. 1-12

  16. Estimación cualitativa de la rugosidad mediante algoritmos de aprendizaje automático en una operación de taladrado

    Revista DYNA, Vol. 95, Núm. 5, pp. 487-491

  17. Evolution of lamellar microstructures in a cast TNM alloy modified with boron through single-step heat treatments

    Intermetallics, Vol. 124

  18. Experimental and numerical simulation investigation on deep drawing process of inconel 718 with and without intermediate annealing thermal treatments

    Applied Sciences (Switzerland), Vol. 10, Núm. 2

  19. Framework to evaluate continuous improvement process efficacy: A case study of a capital goods company

    Quality Innovation Prosperity, Vol. 24, Núm. 2, pp. 93-119

  20. Improvement of material databases for cutting force prediction in finishing conditions of A-356 aluminium alloy

    Procedia CIRP