Argitalpenak (42) Ikertzaileren baten partaidetza izan duten argitalpenak

2019

  1. 1st Esaform mobility grant: Modeling of post machining distortions in thin walls applied to aluminum parts compared to experimental results

    AIP Conference Proceedings

  2. A mechanistic model to predict cutting force on orthogonal machining of Aluminum 7475-T7351 considering the edge radius

    Procedia CIRP

  3. A microstructural based constitutive approach for simulating hot deformation of Ti6Al4V alloy in the α + β phase region

    Materials Science and Engineering A, Vol. 748, pp. 30-37

  4. Air-coupled ultrasonic testing with Lamb waves for straight and curved GFRP plates

    Proceedings of Meetings on Acoustics

  5. Analytical modeling of the uncut chip geometry to predict cutting forces in orthogonal centric turn-milling operations

    International Journal of Machine Tools and Manufacture, Vol. 144

  6. Comparison of Johnson-Cook and modified Johnson-Cook material constitutive models and their influence on finite element modelling of Ti6Al4V orthogonal cutting process

    AIP Conference Proceedings

  7. Corrigendum to “Mechanical characterization and modelling of Inconel 718 material behavior for machining process assessment” (Materials Science &Engineering A (2017) 682 (441–453), (S0921509316314071), (10.1016/j.msea.2016.11.054))

    Materials Science and Engineering A

  8. Coupled Eulerian-Lagrangian (CEL) simulation for modelling of chip formation in AA2024-T3

    Procedia CIRP

  9. Design and characterisation of cellular composite structures for automotive crash-boxes manufactured by out of die ultraviolet cured pultrusion

    Composites Part B: Engineering, Vol. 160, pp. 217-224

  10. Determination of emissivity and temperature of tool rake face when cutting AISI 4140

    Procedia Manufacturing

  11. Enfoque experimental para la toma de decisiones en el proceso de diseño de estructuras: caso de estudio

    Revista DYNA, Vol. 94, Núm. 3, pp. 292-296

  12. Enhanced energy absorption properties in 3D printed polymer matrix composite

    ECCM 2018 - 18th European Conference on Composite Materials

  13. Evaluation of different flow stress laws coupled with a physical based ductile failure criterion for the modelling of the chip formation process of Ti-6Al-4V under broaching conditions

    Procedia CIRP

  14. Experimental and numerical investigation of the cutting force during the angle shearing of several steels

    AIP Conference Proceedings

  15. FEM modeling of hard turning 42CrMoS4 steel

    Procedia CIRP

  16. Fatigue life estimation of cast aluminium alloys considering the effect of porosity on initiation and propagation phases

    International Journal of Fatigue, Vol. 125, pp. 468-478

  17. Finite-element simulations of Al7075-T6 orthogonal cutting: Effect of part geometry and mesh on chip morphology and formation mechanism

    AIP Conference Proceedings

  18. Friction Stir Welding of Lap Joints Using New Al–Li Alloys for Stringer-Skin Joints

    Minerals, Metals and Materials Series

  19. Induction skull melting of Ti-6Al-4V: Process control and efficiency optimization

    Metals, Vol. 9, Núm. 5

  20. Influence of chip segmentation of Ti64 on the topography of the machined surface

    AIP Conference Proceedings